OM-1241-005_w.pdf - 第136页

4-9 AIX-ML T-ID 3.2 Understanding of Maintenance Items on Each Section 0705-003 3.2 Understanding of Maintenance Items on Each Section The following describes how to view the description of each eld (numbered elds) in …

100%1 / 211
4-8
AIX-MLT-ID
3. Maintenance Spots
3.1 Whole View
Notice
Any operations with a cover(s) being removed are included.
After the maintenance work, be sure to attach the cover back in
place.
Traverse
Elevator Shaft
Magazine Base
Fig. D2
Reference
Refer to "3.3" and the subsequent items for the detailed information on the
spots of each section to be maintained and how to maintain them.
0705-003
3. Maintenance Spots
4-9
AIX-MLT-ID
3.2 Understanding of Maintenance Items on Each Section
0705-003
3.2 Understanding of Maintenance Items on Each Section
The following describes how to view the description of each eld (numbered
elds) in "3.3 Inspection, Cleaning, and Lubrication Spots".
View of Inspection, Cleaning, and Lubrication Spots
(ExampleofIdentication)
Pallet
Every Month Inspection and Cleaning
Required Time: 1 minute
When the pallet is dirty, clean both top and
bottom surfaces with a rag.
Top Surface
Every 3 Months Inspection
Required Time: 1 minute
Check for the warpage of the pallet with a
scale. (Up to Max. 0.5 mm)
Rails
Every 3 Months Inspection
Required Time: 2 minutes
Check the wear of the bottom surfaces of
the pallet rails with a scale.
(Up to Max. 0.5 mm)
[1]
[4]
[3][2]
Fig. D3
[1]:
Maintenance Spot
[2]:
Cycle and Contents of Maintenance
[3]:
Details of Maintenance
[4]:
This indicates roughly estimated time required for maintenance work.
(This is included in the time required to attach or detach a cover, etc.)
4-10
AIX-MLT-ID
0705-003
3.3 Inspection, Cleaning, and Lubrication Spots
3.3 Inspection, Cleaning, and Lubrication Spots
The following describes about the maintenance tasks required for each
individual units.
Reference
Refer to "2. Maintenance Check List" for the maintenance items classied
based on frequency.
3.3.1 Pallet
Note
When the pallet is warped, the component pickup rate may deteriorate.
Pallet
Every Month Inspection and Cleaning
Required Time: 1 minute
When the pallet is dirty, clean both top and
bottom surfaces with a rag.
Top Surface
Every 3 Months Inspection
Required Time: 1 minute
Check for the warpage of the pallet with a
scale. (Up to Max. 0.5 mm)
Rails
Every 3 Months Inspection
Required Time: 2 minutes
Check the wear of the bottom surfaces of
the pallet rails with a scale.
(Up to Max. 0.5 mm)
Fig. D4 Pallet