OM-1241-005_w.pdf - 第19页
Safety Precautions Safe-8 AIX-ML T-ID 3. Alert Indications in Instruction Manual The following summarizes the precautionary items and the location of alert indications in the instruction manual. Alert Indications describ…
Safety Precautions
Safe-7
AIX-MLT-ID
Notes on Maintenance
Only a well-trained service person should perform maintenance work carefully
through for the machine in compliance with the instructions.
Before maintenance work, set the power breaker of the machine (GXH series)
to "OFF" and lock it with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its substitute.
Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing any maintenance work, be sure to wait for more than 10 minutes
until the DC power lamp and the charge lamp of the servoamplier turn "OFF" after
the power breaker of the machine (GXH series) is set to "OFF".
0705-003
Safety Precautions
Safe-8
AIX-MLT-ID
3. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as " WARNING "
Alert Description Related Items
There are strong motorized and high-voltage areas inside the
machine. Special caution should be paid not to touch them.
Doing otherwise will cause personal injury (serious accident).
·
Onlyqualiedmaintenancepersonnel
shoulddetachthe
covers.
·
The machine should be operated with the covers being
attached.
·
If a cover is detached, be sure to reattach it.
·
Be sure to close the magazine door before operating the
machine.
·
Do not disengage the interlock of the magazine door.
"3." in "Chapter 1"
Do not bring the tray magnet close to the area where a
pacemaker is implanted. Otherwise, the pacemaker may be
inuencedbyelectromagneticimpulses
ofthemagnet,causing
the wearer to faint, etc.
"3.5" in
"Chapter 1"
Onlyqualiedpersonnelshouldperformthemaintenance
workcarefullyforthemachineincompliancewiththespecied
instructions.
"1.1" in
"Chapter 4"
Before performing any maintenance work, be sure to lock the
power breaker and the air source with padlocks.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 4"
Before detaching the maintenance cover, be sure to turn off the
power breaker and lock it with a padlock.
"4.1.1" in
"Chapter 4"
0705-003
WARNING
Safety Precautions
Safe-9
AIX-MLT-ID
Alert Indications described as " CAUTION "
Alert Description Related Items
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the dc power supply and the servoamplier go "OFF" in 10 minutes or
more after the power breaker is set to "OFF.
"1.1" in
"Chapter 4"
After the maintenance work, be sure to attach the cover back in
place.
"4.1.2" in
"Chapter 4"
0705-003
CAUTION