OM-1241-005_w.pdf - 第83页

2-19 AIX-ML T-ID 3.2.1 Input /Output This window enables the operator to check the I/O signals and view the status of each section. Fig. B13 "INP / OUT" Window Reference Refer to "3.1 "I/O DIAG" …

2-18

AIX-MLT-ID

3.2 Device Check

When the [DVC CHECK] button on the submenu bar of the "MAINT."

window is pressed, the "I/O DIAG" window appears as an initial one of the

"DVC CHECK" window.

Fig. B12 "I/O DIAG" Window

0804-004

3.2 Device Check

2-19

AIX-MLT-ID

3.2.1 Input /Output

This window enables the operator to check the I/O signals and view the

status of each section.

Fig. B13 "INP / OUT" Window

Reference

Refer to "3.1 "I/O DIAG" Window" in "Chapter 4: Menus for

Maintenance" in the instruction manual (Volume 2: Operation) of the main

machine for details.

0804-004

3.2 Device Check

2-20

AIX-MLT-ID

3.2.2 Motor

This window enables the operator to view the manual operation (manual axis

operation) of each device and the system information.

Fig. B14 "MOTOR" Window

Reference

Refer to "3.1 "I/O DIAG" Window" in "Chapter 4: Menus for

Maintenance" (Volume 2: Operation) in the instruction manual of the main

machine for details.

0804-004

3.2 Device Check