OM-1241-005_w.pdf - 第58页
1-21 AIX-ML T-P • Attachment of Tray (1) Put a at and rigid object (thickness: 2 mm or more) under the pallet as shown in the gure below . Pallet Flat and Rigid Object (Thickness: 2 mm or more) Fig. A10 Note Make sure …
1-20
AIX-MLT-P
3.4 Pallets
Pallet (MP-G100)
Area where no tray should be put
136mm
Fig. A9 Pallet
Note
No tray should be put in the shadowed area.
CAUTION
Handle the pallets carefully.
Otherwise, the pallets may be deformed.
•
Do not drop the pallet onto the oor
, etc.
•
Do not apply any force partially to any area of the pallet.
•
Do not store the pallets in a pile.
When a deformed pallet is used, a component pickup error may occur.
When a component pickup error occurs frequently, replace the pallet
with a new one.
0705-003
3.4 Pallets
1-21
AIX-MLT-P
•
Attachment of Tray
(1) Put a at and rigid object (thickness: 2 mm or more) under the pallet as
shown in the gure below.
Pallet
Flat and Rigid Object
(Thickness: 2 mm or more)
Fig. A10
Note
Make sure that the pallet is inserted correctly with its top side facing
upward.
(2) Put the tray on the rear right side of the pallet.
(3) Hold the tray securely with the tray magnets.
Note
(a) Note that the tray magnets must be attached differently, depending on
the type or the shape of a tray.
(b) When the total mass (tray + components) exceeds "500 g", add the
tray magnets in the drawout direction of the pallet according to the
total mass.
Ref.:
One tray magnet has the capability to hold the weight of
approximately 500 g.
(c) It is recommended that up to 4 trays should be mounted when more
than one tray must be used although it is described in the
specications that up to 9 types of trays can be mounted.
(4) Check how the trays are mounted.
Check for any positional deviation of a component, missing
components, incorrectly seated trays (trays seated aoat), and incorrect
location of the tray magnets.
•
Detachment of Tray
(1) Detach the tray magnets.
(2) Detach the tray from the pallet.
0705-003
3.4 Pallets
1-22
AIX-MLT-P
•
To check if the pallet is deformed or not
Put the pallet on a at surface and check if the upper surface of the pallet is
distorted or not by means of a scale, etc.
Scale
Scale
Pallet
Pallet
Distortion (Clearance)
Fig. A11 Checking for Deformation of Pallet
0705-003
3.4 Pallets