OM-1241-005_w.pdf - 第159页
4-32 AX-ML T-ID Error ID Error Name, Description, Cause, and Remedy 43181f T ray Feeder in advance check error Check error before tray feeder operation ----- 431820 Tray Feeder in advance check error Zeroing incomplete -…
4-31
AX-MLT-ID
Error ID Error Name, Description, Cause, and Remedy
431811 Tray Feeder in advance check error
Mis-Pickup comp. Detection 8mm[B0417]
-----
431812 Tray Feeder in advance check error
Mis-Pickup comp. Detection 14mm[B0418]
-----
431813 Tray Feeder in advance check error
Mis-Pickup comp. Detection 28mm[B0419]
-----
431814 Tray Feeder in advance check error
Pallet chuck is not shut
-----
431815 Tray Feeder in advance check error
The pallet Mis-Set was detected.
-----
431816 Tray Feeder in advance check error
Magazine clamp OPEN
-----
431817 Tray Feeder in advance check error
Rack shutter OPEN
-----
431818 Tray Feeder in advance check error
Magazinelocationconrmation
-----
431819 Tray Feeder in advance check error
Elevator axis safety relay
-----
43181a Tray Feeder in advance check error
Others
-----
43181b Tray Feeder in advance check error
Pallet in the Return Position[B0518 B0519]
-----
43181c Tray Feeder in advance check error
Others
-----
43181d Tray Feeder in advance check error
Others
-----
43181e Tray Feeder in advance check error
Others
-----
7.2 Error IDs and Remedial Procedures
0705-003
4-32
AX-MLT-ID
Error ID Error Name, Description, Cause, and Remedy
43181f Tray Feeder in advance check error
Check error before tray feeder operation
-----
431820 Tray Feeder in advance check error
Zeroing incomplete
-----
431701 Tray 1 Feeder Zeroing Error
Pallet was detected at elevator starting point (B0511). (5001)
-----
431901 Tray 1 Feeder Zeroing Error
The L1 axis has fallen below Pass-line.
-----
431902 Tray 1 Feeder Zeroing Error
The L2 axis has fallen below Pass-line.
-----
434001 The abnormalities in a tray feeder sequence
Shuttle tray feeder sequence timeout
-----
7.2 Error IDs and Remedial Procedures
0705-003
5-A
AIX-MLT-ID
0705-003
Chapter 5
Supplement
This chapter describes the pneumatic diagrams, the
parts location, the location of sensors and loads, the
electrical circuit diagrams, etc.
As this chapter contains highly sophisticated contents, it
should carefully be referred to.
•
Pneumatic Diagram
• Layout of Sensors and Loads
• Parts Location
• Electrical Circuit Diagrams