OM-1241-005_w.pdf - 第70页

2-7 AIX-ML T-ID [6] T ray Pickup Matrix Setting Buttons Shown is the tray pickup matrix data. When the [Edit] button is pressed, an input window opens, making it possible to set the tray pickup matrix data. Note As for t…

2-6

AIX-MLT-ID

[3] Component Reload Buttons

When the component-reloaded step is selected and the [Set] button is

pressed, the tray pickup matrix of the selected step is set to "(1, 1)" and

the number of remaining components is updated.

Reloaded Step Selection :

The component-reloaded step must be

selected.

[Overall Attach] Button :

When pressed, this button selects all

steps.

[Set] Button :

When pressed, this button sets the

component reloading condition with the

specied value.

Note

As for the steps that are not used in the pattern program, no component reload

button is displayed.

[4] Step Selection Buttons

When a magazine and a step are selected, the "Block Information"

window appears, making it possible to check and change the tray

matrices.

[5]

[6]

[7]

Fig. B4 "Block Information" Window

[5] "Block Information" Sheet

Shown is the block information.

0804-004

2.2 Component Reloading

2-7

AIX-MLT-ID

[6] Tray Pickup Matrix Setting Buttons

Shown is the tray pickup matrix data.

When the [Edit] button is pressed, an input window opens, making it

possible to set the tray pickup matrix data.

Note

As for the blocks that are not used in the pattern program, no tray pickup

matrix setting button is displayed.

[7] [Return] and [Set] Buttons

[Set] Button :

When pressed, this button sets the edited tray

pickup matrix data and opens the tray pickup

matrix editing window.

[Return] Button :

When pressed, this button cancels the selection

of the tray pickup matrix data and opens the tray

pickup matrix editing window.

0705-003

2.2 Component Reloading

2-8

AIX-MLT-ID

2.2.2 Tray Component Data

When the [Tray Comp. Dt] button is pressed in the "COMP. RELD."

window, the "Tray Comp. Dt" window appears.

[1]

[2]

Fig. B5 "Tray Comp. Dt" Window

[1] Information Display

Shown is the tray component data.

[2] "# of PCB Alarm for Shortage of Comp." Group Box

Set the number of PCBs to issue a component shortage alarm.

The [Edit] button can be used to set an arbitrary number of PCBs.

0804-004

2.2 Component Reloading