OM-1241-005_w.pdf - 第17页
Safety Precautions Safe-6 AIX-ML T-ID Notes on Installation, T ransfer and Maintenance Do not install or transfer the machine on the customer side after shipment. T o ensure perfect operation of the machine, including…
Safety Precautions
Safe-5
AIX-MLT-ID
0705-003
Notes on Machine Operations
This machine uses energetic driving systems and high voltage to run at high
speed. This power and voltage are high enough to cause a serious injury.
To avoid this danger, respect the following guideline.
• Operate the machine with the covers being a ttached.
• Before operating the machine be sure to close the magazine door.
• Do not disengage the interlock mechanisms of the magazine door
.
• After performing setup operations with the magazine door being open, be
sure to close it securely.
The machine must be used with the covers being attached.
Each cover is provided to protect people and objects from any injuries and
damages that might be caused by any moving and high-voltage areas.
Make certain that no person or object comes in contact with the moving
mechanisms while the machine is running.
Whenever you feel danger or abnormality, immediately press the
[EMERGENCY STOP] switch of the machine (GXH series) to stop the
machine.
If the machine is kept running in abnormal condition, an accident or a
breakdown will result.
Whenever you feel danger or abnormality, immediately press the
[EMERGENCY ST
OP] switch of the machine (GXH series) to stop the
machine.
If the machine is kept running in abnormal condition, an accident or a
breakdown will result.
When the tower light (green) of the machine (GXH series) is ON or ashing, it
indicates that the static machine is in the "Automatic" mode (awaiting mode).
In case of a disaster of any kind, earthquake, storm, ood, re, or lightning,
immediately stop the machine (GXH series) and turn of
f the power supply.
When the machine (GXH series) stops due to a component pickup error
, be sure to
remove the mispicked component from the feeder and start the automatic operation.
Safety Precautions
Safe-6
AIX-MLT-ID
Notes on Installation, Transfer and Maintenance
Do not install or transfer the machine on the customer side after shipment.
T
o ensure perfect operation of the machine, including s
afety and accuracy
, only our
installation service department will install the machine or transfer it to another place.
Only the maintenance work on items described in this manual should be performed by
the customer
. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are
not described in this manual.
Otherwise, not only breakdown of the machine but also
personal injury may result.
When an alert label has deteriorated and become illegible, contact our service
department.
0705-003
Safety Precautions
Safe-7
AIX-MLT-ID
Notes on Maintenance
Only a well-trained service person should perform maintenance work carefully
through for the machine in compliance with the instructions.
Before maintenance work, set the power breaker of the machine (GXH series)
to "OFF" and lock it with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its substitute.
Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing any maintenance work, be sure to wait for more than 10 minutes
until the DC power lamp and the charge lamp of the servoamplier turn "OFF" after
the power breaker of the machine (GXH series) is set to "OFF".
0705-003