MDO3000 Programmer Manual.pdf - 第1119页
Appendix G: Application Module-enabled Commands Application M o dule Commands DPO4ENET TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:TYPe}:V ALue TRIGger:A:BUS:B<x>:ETHERnet:QT AG:V ALue TRIGger:A:B US:B<x>:…
Appendix G: Application Module-enabled Commands
Application Mo
dule
Commands
DPO4ENET Ethernet Serial Triggering and Analysis Module. Enables triggering on packet-level information on
10BASE-T and 100BASE-TX buses as well as analytical tools such as digital views of the signal, bus views,
packet decodi
ng, search tools, and packet decode tables w ith time-stamp information.
BUS:B<x>:ET
HERnet:PRObe
BUS:B<x>:ETHERnet:PROTOcol
BUS:B<x>:ETHERnet:SOUrce:DIFFerential
BUS:B<x>:E
THERnet:SOUrce:DMINus
BUS:B<x>:ETHERnet:SOUrce:DPLUs
BUS:B<x>:ETHERnet:TYPe
SEARCH:SE
ARCH<x>:TRIGger:A:BUS:B<x>:ETH E Rnet:C ON D ition
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:DATa:HIVALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:DATa:OFFSet
SEARCH:S
EARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:DATa:SIZe
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:DATa:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:FRAMETYPe
SEARCH:S
EARCH<x>:TRIG:A:BUS :B<x>:ETHER:IPH:DEST:VAL
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:IPHeader:PROTOcol:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:IPHeader:SOUrceaddr:VALue
SEARCH:
SEARCH<x>:TRIG:A:BUS:B<x>:ETHER:MAC:ADDR:DE ST:VAL
SEARCH:SEARCH<x>:TRIG:A:BUS:B<x>:ETHER:MAC:ADDR:SOU:VAL
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:TYPe}:?HIVALue
SEARCH
:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:TYPe}:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:QTAG:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:QUALifier
SEARC
H:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:TCPHeader:ACKnum:VALue
SEARCH:SEARCH <x>:TR IG:A :BUS:B<x>:ETHER:TCPH:DEST:VAL
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:TCPHeader:SEQnum:VALue
SEARC
H:SEARCH<x>:TRIG:A :BUS:B<x>:ETHER:TCPH:SOU :VAL
TRIGger:A:BUS:B<x>:ETHERnet:C ON D ition
TRIGger:A:BUS:B<x>:ETHERnet:DATa:HIVALue
TRIG
ger:A:BUS:B<x>:ETHERnet:DATa:OFFSet
TRIGger:A:BUS:B<x>:ETHERnet:DATa:SIZe
TRIGger:A:BUS:B<x>:ETHERnet:DATa:VALue
TRI
Gger:A:BUS:B<x>:ETHERnet:FRAM E TYP e
TRIGger:A:BUS:B<x>:ETHERnet:IPHeader:DESTinationaddr:VALue
TRIGger:A:BUS:B<x>:ETHERnet:IPHeader:PROTOcol:VALue
TRI
Gger:A:BUS:B<x>:ETHERnet:IPHeader:SOUrceaddr:VALue
TRIGger:A:BUS:B<x>:ETHERnet:MAC:ADDRess:DESTination:VALue
TRIGger:A:BUS:B<x>:ETHERnet:MAC:ADDRess:SOUrce:VALue
TR
IGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:TYPe}:HIVALue
G-10 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Appendix G: Application Module-enabled Commands
Application M o
dule
Commands
DPO4ENET TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:TYPe}:VALue
TRIGger:A:BUS:B<x>:ETHERnet:QTAG:VALue
TRIGger:A:B
US:B<x>:ETHERnet:QUALifier
TRIGger:A:BUS:B<x>:ETHERnet:TCPHeader:ACKnum:VALue
TRIGger:A:BUS:B<x>:ETHERnet:TCPHeader:DESTinationport:VALue
TRIGger:A:
BUS:B<x>:ETHERnet:TCPHeader:SEQnum:VALue
TRIGger:A:BUS:B<x>:ETHERnet:TCPHeader:SOUrceport:VALue
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual G-11
Appendix G: Application Module-enabled Commands
Application Mo
dule
Commands
DPO4LMT,
MDO3LMT
Enables testing against limit masks generated from "golden" waveforms and mask testing using custom
user-defined masks.
APPLication:TYPe
MASK:COPy:SOUrce
MASK:COPy:U
SER
MASK:COUNt
MASK:COUNt:FAILURES ?
MASK:COUNt
:HITS?
MASK:COUNt:SEG<x>:HITS?
MASK:COUNt:TESTS?
MASK:COUN
t:VIOLATIONS?
MASK:COUNt:WAVEFORMS?
MASK:CUSTom
MASK:DIS
play
MASK:LOCk
MASK:MARgin:PERCent
MASK:SO
Urce
MASK:STANdard
MASK:STOPOnviolation
MASK:TE
MPLate:CREATEmask
MASK:TEMPLate:SOUrce
MASK:TEMPLate:TOLerance:HORizontal
MASK:T
EMPLate:TOLerance:VERTical
MASK:TESt:AUXout:COMPLetion
MASK:TESt:AUXout:FAILure
MASK:
TESt:COMPLetion:CRITerion
MASK:TESt:DELay
MASK:TESt:HARDCopy
MASK:
TESt:REPeat
MASK:TESt:SAVEIMAGE
MASK:TESt:SAVEWFM
MASK
:TESt:SRQ:COMPLetion
MASK:TESt:SRQ:FA ILure
MASK:TESt:STATE
MAS
K:TESt:STATus?
MASK:TESt:STOP:FAILure
MASK:TESt:THReshold
G-12 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual