MDO3000 Programmer Manual.pdf - 第3页
MDO4000C, MDO4000B, MDO4000 , MSO4000B, DPO4000B and MDO3000 Series Oscilloscopes ZZZ Programmer Manual xx Revision A MSO4000B, DPO4000B, MDO4000 and MDO4000B models should have fi rm ware version 3.10 or abov e to use so…
MDO4000C, MDO4000B, MDO4000, MSO4000B, DPO4000B and
MDO3000
Series Oscilloscopes
ZZZ
Programmer Manual
xx
Revision A
MSO4000B, DPO4000B, MDO4000 and
MDO4000B models should have firmware
version 3.10 or above to use some of
the c ommands listed in this document.
MDO4000C models should have firmware
version 1.02 and above.
www.tek.com
077-0510-09
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting
Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. B o x 50
0
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwi
de, visit www.tek.com to find contacts in your area.