MDO3000 Programmer Manual.pdf - 第403页

Commands Listed in Alphabetical Order Returns Integer , repre senting the number of hits in the mask segment. Examples MASK:COUNT:SE G1:HITS? might r eturn MASK:COUNT :SE G1:HITS 0 , showing that there have been n o hits…

100%1 / 1158
Commands Listed in Alphabetical Order
Aseriesofexam
ples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series models,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
Syntax
MASK:COUNt:HITS?
Related Commands
MASK:COUNt
MASK:COUNt:SEG<x>:HITS?
Returns
<NR1>
Examples
MASK:COUNT:TOTAL? might return :MASK:COUNT:TOTAL 150, showing 150
hits have occurred.
MASK:COUNt:SEG<x>:HITS? (Query Only)
This query returns the number of hits for the specified mask segment. There
are up to 8 segments.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series models,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
Syntax
MASK:COUNt:SEG<x>:HITS?
Related Commands
MASK:COUNt:HITS?
MASK:COUNt
2-372 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Returns
Integer, repre
senting the number of hits in the mask segment.
Examples
MASK:COUNT:SEG1:HITS? might return MASK:COUNT :SEG1:HITS 0 , showing
that there have been no hits to mask segment 1.
MASK:COUNt:TESTS? (Query Only)
This query returns the number of pass/fail mask tests that have occurred.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 ser
ies models,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
Syntax
MASK:COUNt:TESTS?
Related Commands
MASK:COUNt:HITS?
MASK:COUNt
Returns
Integer that represents how many mask tests have occurred.
Examples
MASK:COUNT:TESTS? might return 50, showing that 50 mask tests have occurred.
MASK:COUNt:VIOLATIONS? (Query Only)
This query returns the number of test violations that have occurred in the current
mask pass/fail test. A test violation occurs when any part of a waveform falls
within any mask segment. The default is 0.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series models,
and an MDO3LMT application module for MDO3000 series models.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-373
Commands Listed in Alphabetical Order
Group
Mask
Syntax
MASK:COUNt:VIOLATIONS?
Related Commands
MASK:COUNt:TESTS?, MASK:COUNt:WAVEFORMS?
Returns
<NR1>
Examples
MASK:COUNT:VIOLATIONS? might return: 250 showing that 250 test violations
have occurred.
MASK:COUNt:WAVEFORMS? (Query Only)
This query returns the number of waveforms that have been acquired and
processed during pass/fail mask testing.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series models,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
Syntax
MASK:COUNt:WAVEFORMS?
Rel
ated Commands
MASK:COUNt:TESTS?,
MASK:COUNt
Returns
Integer
Examples
MASK:COUNT:WAVEFORMS? might return: 1,000, showing that 1,000 waveforms
have been acquired and processed.
2-374 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual