MDO3000 Programmer Manual.pdf - 第52页

Command Groups Ta b l e 2 - 2 0 : C o n ﬁ guration Commands (cont.) Command Description CONFIGuration:BUSW A VEFORMS:LIN? This query returns a boolean value to indicate whether the optional LIN bus triggering and analysi…

Command Groups

Table 2-20: Conﬁguration Commands (cont.)

Command

Description

CONFIGuration:ANALOg:GNDCPLG?

This query returns a boolean value to indicate whether the

instrument supports the ground coupling feature for analog

channels. As this feature is not supported on M SO /DPO4000B

or MDO4000/B/C models, this query always returns 0.

CONFIGuration:ANALOg:MAXBANDWidth? Returns the maximum bandwidth for analog channels.

CONFIGuration:ANALOg:MAXSAMPLERate? This query returns the m aximum sample rate for analog channels.

CONFIGuration:ANALOg:NUMCHANnels? This query returns the number of analog channels.

CONFIGuration:ANALOg:RECLENS? This query returns a list of supported record lengths for analog

channels.

CONFIGuration:ANALOg:VERTINVert?

This query returns a boolean value to indicate whether the

instrument supports the vertical invert feature for analog

channels.

CONFIGuration:APPLications:CUSTOMMask? Indicates whether the Custom Mask test feature is present and

enabled.

CONFIGuration:APPLications:LIMITMask?

This query returns a boolean value to indicate whether the

instrument supports the mask/limit test application feature.

CONFIGuration:APPLications:POWer?

This query returns a boolean value to indicate whether the

optional power application feature is present.

CONFIGuration:APPLications:STANDARDMask? Indicates whether the Standard Mask test feature is present

and enabled.

CONFIGuration:APPLications:VIDPIC? Indicates whether the Video Picture feature is present and

enabled.

CONFIGuration:ARB? Indicates whether or not the arbitrary function generator

hardware is present, and the user-deﬁned arbitrary waveform

generation feature is enabled. Note that this is different than the

CONFIGuration:AFG? query.

CONFIGuration:AUXIN?

This query returns a boolean value to indicate whether the

instrument has an Aux Input connector.

CONFIGuration:BUSWAVEFORMS:ARINC429A?

This query returns a boolean value to indicate whether the

optional ARINC429 bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:AUDIO?

This query returns a boolean value to indicate whether the

optional audio bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:CAN?

This query returns a boolean value to indicate whether the

optional CAN bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:CANFD?

This query returns a boolean value to indicate whether the

optional CAN FD bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:ETHERNET?

This query returns a boolean value to indicate whether the

optional Ethernet triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:FLEXRAY?

This query returns a boolean value to indicate whether the

optional FlexRay bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:I2C?

This query returns a boolean value to indicate whether the

optional I

C bus triggering and analysis feature is present.

MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-21

Command Groups

Table 2-20: Conﬁguration Commands (cont.)

Command

Description

CONFIGuration:BUSWAVEFORMS:LIN?

This query returns a boolean value to indicate whether the

optional LIN bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:MIL1553B?

This query returns a boolean value to indicate whether the

optional MIL-S TD-1553 bus triggering and analysis feature is

present.

CONFIGuration:BUSWAVEFORMS:NUMBUS? This query returns the number of bus waveforms.

CONFIGuration:BUSWAVEFORMS:PA Rallel?

This query returns a boolean value to indicate whether the

parallel bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:RS232C?

This query returns a boolean value to indicate whether the

optional RS232 bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:SPI?

This query returns a boolean value to indicate whether the

optional SPI bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:USB? This query returns a boolean value to indicate whether the USB

bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:USB:HS?

This query returns a boolean value to indicate whether the

high-speed USB bus triggering and analysis feature is present.

CONFIGuration:DIGITAl:MAGnivu?

This query returns a boolean value to indicate whether the

instrument supports the MagniVu feature for digital channels. If

there are no digital channels, the value returned is 0.

CONFIGuration:DIGITAl:MAXSAMPLERate? This query returns the maximum sample rate for digital channels,

in samples per second.

CONFIGuration:DIGITAl:NUMCHANnels? This query returns the number of digital channels.

CONFIGuration:DVM?

Indicates whether the Digital Voltmeter hardware is present. and

the DVM feature is enabled.

CONFIGuration:EXTVIDEO?

This query returns a boolean value to indicate whether the

optional extended video trigger features are present.

CONFIGuration:HISTOGRAM?

This query returns a boolean value to indicate whether the

waveform histogram feature is present.

CONFIGuration:NETWORKDRIVES?

This query returns a boolean value to indicate whether network

drives are present.

CONFIGuration:NUMMEAS? This query returns the number of periodic measurements.

CONFIGuration:REFS:NUMREFS? This query returns the number of reference waveforms.

CONFIGuration:RF:ADVTRIG?

This query returns a boolean value to indicate whether the

advanced RF trigger and analysis feature is present.

CONFIGuration:RF:BANDWidth? This query returns the maximum bandwidth, in hertz, for RF

channels. If there are no RF channels, the value returned is 0.

CONFIGuration:RF:MAXBANDWidth? Returns the maximum bandwidth, in hertz, for RF channels.

CONFIGuration:RF:NUMCHANnels? This query returns the number of RF channels present.

CONFIGuration:ROSC?

This query returns a boolean value to indicate whether the

instrument has an external reference oscillator ( RO SC) input.

2-22 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Command Groups

Cursor Comman

dGroup

Use the commands in the Cursor Command Group to control the cursor display

and readout. You can use these commands to control the setups for cursor 1 and

cursor 2, suc

h as cursor position.

You can also use the commands to select one of the following cursor functions:

Off. Turns off the display of all cursors.

Waveform Cursors. Consists of two cursors. Waveform cursors enable you

to conveniently measure waveform amplitude and time.

Screen Cursors. Consists of two pairs of independent horizontal and vertical

cursors. You can use these cursors to indicate an arbitrary position within

the waveform display area.

Table 2-

21: Cursor Commands

Command

Descrip

tion

CURSor?

Return

s cursor settings

CURSor:DDT? Returns the cursor deltaY/deltaT (dY/dT) readout

CURSor:FUNCtion This command speciﬁes the cursor type

CURSor:HBArs?

Retu

rns hbar cursor settings

CURSor:HBArs:DELTa? Returns hbars cursors vertical difference

CURSor:HBArs:POSITION<x> This command speciﬁes the hbar cursor<x> v ertical position

CURSor:HBArs:UNIts

Ret

urns hbar cursor units

CURSor:HBArs:USE Sets the horizontal bar cursor measurement scale, for use with ratio c ursors

CURSor:MODe This command speciﬁes whether cursors move in unison or separately

CURSor:SOUrce This command speciﬁ es the cursor source, which can be one of channels 1–4, reference

waveforms 1–4, math waveform, bus 1–4, digital channels 0– 15 (MSO/MDO4000 models

and MDO3000 and MDO4000C models w ith option M DO 3MSO or MDO4MSO installed),

the RF time domain traces, (MDO4000/B models) or AUTO.

CURSor:VBArs? This command speciﬁes the position of vertical bar cursors

CURSor:VBArs:ALTERNATE<x>? Returns the alternate r eadout for the waveform (Vbar) cursors

CURSor:VBArs:DELTa? Returns the horizontal difference between vbar cursors

CURSor:VBArs:HPOS<x>? Returns the vertical value of the speciﬁed vertical bar tick

CURSor:VBArs:POSITION<x> This command speciﬁes the vbar cursor<x> horizontal position

CURSor:VBArs:UNIts This command speciﬁes the horizontal units for vbar cursors

CURSor:VBArs:USE Sets the vertical bar cursor measurement scale

CURSor:VBArs:VDELTa? Returns the vertical difference between the two vertical bar cursor ticks

CURSor:XY:POLar:RADIUS:DELta? Returns the difference between the cursors X radius and the cursor Y radius

CURSor:XY:POLar:RADIUS:

POSITION<x>?

Returns the polar radius of the speciﬁed cursor

CURSor:XY:POLar:RADIUS:UNIts?

Returns the polar radius units

MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-23