MDO3000 Programmer Manual.pdf - 第1121页

Appendix G: Application Module-enabled Commands Application M o dule Commands DPO4LMT , MDO3LMT MASK:TESt:TIME MASK:TESt:W A VEform MASK:USER:A MPLitude MASK:USER:HSCAle MASK:USER:HTRIGPOS MASK:USER: LABel MASK:USER:RECO…

100%1 / 1158
Appendix G: Application Module-enabled Commands
Application Mo
dule
Commands
DPO4LMT,
MDO3LMT
Enables testing against limit masks generated from "golden" waveforms and mask testing using custom
user-defined masks.
APPLication:TYPe
MASK:COPy:SOUrce
MASK:COPy:U
SER
MASK:COUNt
MASK:COUNt:FAILURES ?
MASK:COUNt
:HITS?
MASK:COUNt:SEG<x>:HITS?
MASK:COUNt:TESTS?
MASK:COUN
t:VIOLATIONS?
MASK:COUNt:WAVEFORMS?
MASK:CUSTom
MASK:DIS
play
MASK:LOCk
MASK:MARgin:PERCent
MASK:SO
Urce
MASK:STANdard
MASK:STOPOnviolation
MASK:TE
MPLate:CREATEmask
MASK:TEMPLate:SOUrce
MASK:TEMPLate:TOLerance:HORizontal
MASK:T
EMPLate:TOLerance:VERTical
MASK:TESt:AUXout:COMPLetion
MASK:TESt:AUXout:FAILure
MASK:
TESt:COMPLetion:CRITerion
MASK:TESt:DELay
MASK:TESt:HARDCopy
MASK:
TESt:REPeat
MASK:TESt:SAVEIMAGE
MASK:TESt:SAVEWFM
MASK
:TESt:SRQ:COMPLetion
MASK:TESt:SRQ:FA ILure
MASK:TESt:STATE
MAS
K:TESt:STATus?
MASK:TESt:STOP:FAILure
MASK:TESt:THReshold
G-12 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Appendix G: Application Module-enabled Commands
Application M o
dule
Commands
DPO4LMT,
MDO3LMT
MASK:TESt:TIME
MASK:TESt:WAVEform
MASK:USER:A
MPLitude
MASK:USER:HSCAle
MASK:USER:HTRIGPOS
MASK:USER:
LABel
MASK:USER:RECOrdlength
MASK:USER{:SEG<x>|:MASK<x>}
MASK:USER{
:SEG<x>|:MASK<x>}:NR_Pt?
MASK:USER{:SEG<x>|:MASK<x>}:POINTS
MASK:USER:TRIGTOSAMP
MASK:USER
:VOFFSet
MASK:USER:VPOS
MASK:USER:VSCAle
MASK:USE
R:WIDth
RECAll:MASK
SAVe:MASK
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual G-13
Appendix G: Application Module-enabled Commands
Application Mo
dule
Commands
DPO4PWR,
MDO3PWR
Power Analysis Application Module. Enables quick and accurate analysis of power quality, switching loss,
harmonics, safe operating area (SOA), modulation, ripple, and slew rate (dI/dt, dV/dt).
APPLication:TYPe
POWer:CURRENTSOurce
POWer:QUALi
ty:VCRESTfactor?
POWer:DISplay
POWer:GATESOurce
POWer:GATi
ng
POWer:HARMonics:DISplay:SELect
POWer:HARMonics:DISplay:TYPe
POWer:HAR
Monics:FREQRef
POWer:HARMonics:FREQR ef:FIXEDFREQ Value
POWer:HARMonics:IEC:CLAss
POWer:HA
RMonics:IEC:FILter
POWer:HARMonics:IEC:FUNDamental
POWer:HARMonics:IEC:GROUPing
POWer:H
ARMonics:IEC:INPUTPOWer
POWer:HARMonics:IEC:LINEFREQuency
POWer:HARMonics:IEC:OBSPERiod
POWer:H
ARMonics:IEC:POWERFACtor
POWer:HARMonics:MIL:FUNDamental:CALCmethod
POWer:HARMonics:MIL:FUNDamental:USER:CURrent
POWer:
HARMonics:MIL:LINEFREQuency
POWer:HARMonics:MIL:POWERLEVel
POWer:HARMonics:NR_HARMonics
POWer
:HARMonics:RESults:HAR<1-400>:FREQuency?
POWer:HARMonics:RESults:HAR<1-400>:IECMAX?
POWer:HARMonics:RESults:HAR<1-400>:LIMit?
POWer
:HARMonics:RESults:HAR<1-400>:PHASe?
POWer:HARMonics:RESults:HAR<1-400>:RMS:ABSolute?
POWer:HARMonics:RESults:HAR<1-400>:RMS:PERCent?
POWe
r:HARMonics:RESults:HAR<1-400>:TEST:IEC:CLASSALIMit?
POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:NORMAL?
POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:POHCLIMit?
POW
er:HARMonics:RESults:HAR<1-400>:TEST:MIL:NO RMAL?
POWer:HARMonics:RESults:IEC:FUNDamental?
POWer:HARMonics:RESults:IEC:HARM3ALTernate?
POW
er:HARMonics:RESults:IEC:HARM5ALTernate?
G-14 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual