00197490-03_SM_CP20-P-M2_EN保养维护.pdf - 第11页

1 Introduction 1.5 Tools required, measuring equipment and materials Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018 11 1.5 Tools required, measuring equipment and materials Before starting work, ma…

1 Introduction

1.3 Staff qualifications and training

10 Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018

1.2.7 SIPLACE on the World Wide Web (WWW)

Log into our SIPLACE® homepage at www.asm-smt.com.

You can choose between the German and English versions.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can also access the MySIPLACE user group. Here you can call

up special information about our placement systems, e.g.

●

technical documentation

●

technical information

●

spare parts lists etc.

Registration for theMySIPLACE user group is very simple:

► Click at the head of the web site on

and then on the Register

link.

► Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with user name and password

1.3 Staff qualifications and training

Qualified or adequately trained personnel means that these people are familiar with the setting up,

operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:

●

Have been trained, instructed or authorized to switch on and off, isolate, earth and identify

electrical circuits and system components in accordance with normal safety standards.

●

Have been trained or instructed in the upkeep and use of appropriate safety equipment in

accordance with normal safety standards.

●

Have received first aid training.

1.4 Abbreviations

Abbreviation Description

PA, PA1, PA2 Placement area, Placement area 1, Placement area 2

CO Component

CP Collect&Place

C&P20, CP20 Collect&Place head with 20 segments

C&P20/A/M Collective term for C&P20, C&P20 A and C&P20 M

C&P20 P/M2 Collective term for C&P20 P and C&P20 M2

ESD Electrostatic sensitive device

EMC Electromagnetic compatibility

FHE Fast Head Exchange

PCB PCB Board

HMK Head Maintenance Kit

P&P Pick&Place

SCS Single Core Solution

SC Station computer

VS Vision system type

ID Intermediate distributor

1 Introduction

1.5 Tools required, measuring equipment and materials

Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018 11

1.5 Tools required, measuring equipment and materials

Before starting work, make sure that all the necessary tools and materials are available.

●

As a basic configuration we recommend the "Head Maintenance Kit for CPx" [03109541‑xx]

(see below).

The HMK contains many of the tools and materials needed for service work. Any additional

materials needed will be listed separately.

Please also observe the technical information "Head Maintenance und Exchange

Kit" [DE:TI2017‑09D05] [EN:TI2017‑09E05].

●

The spare parts required can be found in the chapters concerned.

●

For more information refer to the service section of our homepage at www.siplace.com.

Head Maintenance Kit (HMK)

Fig.2: Overview – Head Maintenance Kit for CPx [03109541‑xx].

NOTICE

Various development stages

Your HMK may not contain all the materials shown, depending on its development stage.

Tools contained in the HMK: Item no.

T03 Anti-static tweezers, Bernstein 5-192 00377393-xx

T07 Torque screwdriver ESD 1.0-5.0 Nm 03078400-xx

T08 Bit holder for TorqueVario screwdriver 03078706-xx

T09 Extension/ straight TX20 03073256-xx

T12 Hexagon socket head cap screw driver 0.7 - 2 00320265-xx

T13 Double wrenches size 17 x 19 03109304-xx

T19 Wire cutter electronic size 110 00318673-xx

T22 Multipette M4 00386154-xx

T23 Combitips advanced 0.1 ml blue 03070440-xx

1 Introduction

1.5 Tools required, measuring equipment and materials

12 Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018

Tools contained in the HMK: Item no.

T24 Combitips advanced 0.1ml black 03078990-xx

T25 Combitips advanced 0.1 ml yellow 03077923-xx

T26 Combitips advanced 0.1 ml green 03077924-xx

T29 Lubrication application tool for star bearing CPP 03078632-xx

T30 DP clamping ring for fitting the CPP front plate 03077754-xx

T32 Fork wrench size 10 03109302-xx

T37 Tweezers for filter disk CPP 03046190-xx

T40 Combitips advanced 0.1 ml red 03118173-xx

T41 Silicone hose D=12 mm L=20 mm 03058392-xx

T42 CD marker Edding 8400 03070076-xx

T44 Torque screwdriver ESD 0.1 - 0.6 Nm 00386132-xx

T46 Wrench socket size 8 - 1/4" 03122880-xx

T47 Torque screwdriver ESD 0.4 - 1.0 Nm 00386253-xx

T50 Tool to adjust torque screwdriver ---

T53 Tweezers angled 140 mm oval tips 00096487-xx

T57 Combitips advanced 10 ml orange 03109540-xx

T66 Filter disk removal device C&P20P 03108641-xx

T76 Torque interchangeable blades 1.5 mm, hexagonal 00386135-xx

T77 Torque interchangeable blades 2 mm, hexagonal 00386136-xx

T78 Torque interchangeable blades 2.5 mm, hexagonal 03090019-xx

T79 Torque interchangeable blades 3 mm, hexagonal 03109522-xx

T80 Phillips interchangeable blades PH1 03075861-xx

In addition, you need the following tools which are not included in the HMK:

Tools not contained in the HMK: Item no.

Protective cover CO sensor C&P20 P 03112729‑xx

Loctite 222 00351416‑xx

Fork wrench set 3.2 to 14 mm 00096290‑xx

Magnet removal plate for SIPLACE C&P20 A 03078491‑xx

DP change tool for the SIPLACE C&P20P 03109065‑xx

Filter disk extraction device 03108641‑xx

Tweezers, blunt 145mm size 3mm 00376493‑xx

Pipe/hose cutters Festo ZRS 7658 00381443‑xx

Feeler gauges 0.05 – 1.00 mm 00094020‑xx

Torque interchangeable blades, Pozidriv size 0 ---

Flat-bladed screwdriver size 0 ---

Tools for removing/fitting and calibrating the head, if needed (see also the

service manual for your machine)

---