00193897-0302_AI_MTC2+BE_DE+EN.pdf - 第117页
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series Edition 07/2009 115 2.10.2 Inst allation of the MTC2 in SIPLACE HF (Series No. up to A001) The machine should now be as follows:: 2 2 Fig. …
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
114
2
Attention: Heavy machine component!
2
: Organise a helper:
One person grips the MTC2 slide-in framework by the handles and the other loosens the four
bolts used for
fixing to the MTC2.
2
2
2
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
115
2.10.2 Installation of the MTC2 in SIPLACE HF (Series No. up to A001)
The machine should now be as follows:: 2
2
Fig. 2.10.1 HF series locations 2 and 4
2
Fig. 2.10.2 HF-series Location 2 bzw. 4
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
116
2
With the HF series, the MTC can only be used at locations 2 and 4 for a 1-gantry placement area.
2
2
2
Ensure that the cables and hoses are not damaged.
2
2
2
Heavy machine component! Two people should lift the slide-in framework into the machine.
2
: Install the MTC2 slide-in framework in the placement machine.
2
2
2
2
2
2
2
2
2
2
2
2
2
2