00193897-0302_AI_MTC2+BE_DE+EN.pdf - 第81页

Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series Edition 07/2009 79 2.4.5 T ools and consumables required – Fit-up aid f. carriage or enterin g /X-S (03015976-) – Suitable lif ting equipme…

Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series

Edition 07/2009

2.4.3 Hardware: Component docking unit HF R2 for S-tape feeders

(for HF- (Series No. from A001) and for X-series)

00119622-xx Component trolley SIPLACE HF / X-series / D3 (S-tape feeders)2

00378461-xx Retrofit kit component docking unit HF 2

1 x 03021983-xx Component docking unit cpl. R 2

1 x 03016244-xx Protection X-HS R barcode panel cpl. 2

1 x 03016845-01 Bar code lable X 1-4 2

1 x 03039690-01 Bar code lable X-Sierie sigle cover 2

1 x 03005372-xx Cover long EGS centre 2

1 x 03004716-xx Wasteþchute 2

1 x 03023746-xx Machine cover X-F MTC right 2

3 x 00845076-xx DIN912 M8x20 - 8.8 2

1 x 03025007-xx Machine cover X-HS MTC left 2

2 x 00845080-xx DIN912 M8x40 - 8.8 2

1 x 03002681-xx Reamed bolt 10*40/M8 2

1 x 00193897-xx Assembly instructions MTC2 - Component trolley

for HF- / -series 2

2.4.4 Hardware: Component docking unit X-series for X-tape feeders

00119722-xx Component trolley SIPLACE X-series (X-tape feeders) 2

00378465-xx Retrofit kit component docking unit X 2

1 x 03016244-xx Protection X-HS R barcode panel cpl. 2

1x 03015680-xx Component docking unit X-series cpl. 2

1 x 03005372-xx Cover long EGS centre 2

1 x 03004716-xx Waste chute 2

1 x 03023746-xx Machine cover X-F MTC right 2

1 x 03039690-01 Bar code lable X-series single cover 2

1 x 03025007-xx Machine cover X-HS MTC left 2

2 x 00845076-xx DIN912 M8x20 - 8.8 2

1 x 00845080-xx DIN912 M8x40 - 8.8 2

1 x 00308873-xx DIN912 M8x55 - 8.8,

copper-plated / nickel-plated 2

1 x 03002681-xx Reamed bolt 10*40/M8 2

1 x 00193897-xx Assembly instructions MTC2 - Component trolley for HF-/X-series 2

Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series

Edition 07/2009

2.4.5 Tools and consumables required

– Fit-up aid f. carriage or entering /X-S (03015976-)

– Suitable lifting equipment (e.g. hand crane)

– 1 Pair of gloves

– Set of hexagon socket spanners

– Set of screwdrivers

– Diagonal cutter

– Set of cable ties

2.4.6 Required instructions

00193892-xx Assembly instructions conveyor cover SIPLACE HF-series / X-series / D3

00193756-xx Assembly instructions nozzle changer SIPLACE HF-series

00194550-xx Assembly instructions reject bin sensors SIPLACE HF-series

00194482-xx Assembly instructions nozzle changer SIPLACE X-series

194716-xx Assembly instructions reject bin sensors SIPLACE X-series

00193634- xx User Manual SIPLACE MTC2

00193921-xx User Manual SIPLACE HF

00195284-xx User Manual X-series

Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series

Edition 07/2009

2.5 Montage component docking unit

2.5.1 Preparatory work

: Shutdown the computer and turn it off.

: Switch off the placement machine at the main switch.

: Open the protective cover.

: Disconnect the machine from the power supply and

lock to prevent reconnection.

: Open and remove the cover over the compressed-air supply or power supply and place it out-

side the working area.

: If necessary, the machine cover (depending on location right or left) must be removed. For fur-

ther information, see Chapter 2.6.2 ”Assembly of machine protection” or page - 102 "Mount

parts from retrofit kit".

2.6 Installation of component docking unit for S-tape

feeders on a SIPLACE HF (Series No. up to A001)

The machine should now be as follows: 2

Fig. 2.6.1 For installation in prepared machine