00193897-0302_AI_MTC2+BE_DE+EN.pdf - 第128页
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-se ries Edition 07/2009 126 Photos of inst allation in locati on 2/4 in 2-gantry placement are a 2 : Position the slide-in fram ework in the machi…
2b
2b
1b
2a
1a
2a
2a
2a
2a
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
125
2
Fig. 2.11.2 1-gantry placement area: Fixing inside with protective cover fitted
2
Fig. 2.11.3 1-gantry placement area: Fixing outside with protective cover fitted
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
126
Photos of installation in location 2/4 in 2-gantry placement area 2
: Position the slide-in framework in the machine fram
e about 11 cm away from the front edge.
1a
1b
2
Fig. 2.11.4 2-gantry placement area: Distance to front edge about 11 cm
2-gantry placement area: 2
(1b) Reamed bolt (note position) 2
(2b) Bolts 2
1a 2a2a
1b 2b
2b
2b
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
127
2
Fig. 2.11.5 2-gantry placement area: Fixing positions inside (FS 03)
2
Fig. 2.11.6 2-gantry placement area: Fixing outside with protective cover fitted