ACT - Accuracy Check Tool mit SSW 6xx User Manual 2017.pdf - 第112页

ACT with SSW 6xx / User Manual 07/2017 Edition 48 Figure 4-23: Dialog box: Acc ess level (example SIPLACE D1) ► Enable the Serv icetechniker (Se rvice) access level and confirm y our entry with OK . If a password has be …

100%1 / 132
ACT with SSW 6xx / User Manual 07/2017 Edition
47
4.2.5 Working with the ACT Function under Station Software 605.xx
NOTES
On SIPLACE X and D machines running station software 605.xx (platform 2+), it is
necessary to install additional software on the station computer to be able to use the
ACT.
The installation is described in chapter 5.
► Switch on the machine.
The station computer will boot. The user interface basic view for the SC program will soon appear.
Figure 4-22: Basic view of user interface GUI at the station
► From the Optionen (Options) menu, select Bedienebene… (Access level...) (Abbildung 4-23).
The Bedienebene (Access level) dialog box opens.
ACT with SSW 6xx / User Manual 07/2017 Edition
48
Figure 4-23: Dialog box: Access level (example SIPLACE D1)
► Enable the Servicetechniker (Service) access level and confirm your entry with OK.
If a password has been defined, a dialog box for entering the password opens.
► Enter the password and confirm with OK.
► Select the Optionen - Betriebsart...(Options − Control mode...) menu items.
Figure 4-24: Basic view of user interface for SC program (example SIPLACE D1)
The Betriebsart (Control mode) dialog box opens.
► Select SIPLACE Pro and confirm the setting with OK.
ACT with SSW 6xx / User Manual 07/2017 Edition
49
Figure 4-25: Dialog box operating mode switchover to SIPLACE Pro at the station (example SIPLACE D1)
► Press the START button on the machine.
The reference run is executed.
► Send the recipe / job to the station with the relevant setup and the ACT placement program.
► From the Optionen (Options) menu, select Modus ACT (ACT mode).
The ACT dialog box opens and the machine will automatically switch to Stand Alone mode.
Figure 4-26: Basic view of user interface for SC program (example SIPLACE D1)
After setting Modus ACT (ACT mode) an icon is displayed for ACT.