ACT - Accuracy Check Tool mit SSW 6xx User Manual 2017.pdf - 第113页
ACT with SSW 6xx / User Manual 07/2017 Edition 49 Figure 4-25: Dialog box operating mode switchover to SIPLACE Pr o at the station (example SIPLACE D1) ► Press the START button on t he machine. The reference run is ex ec…
ACT with SSW 6xx / User Manual 07/2017 Edition
48
Figure 4-23: Dialog box: Access level (example SIPLACE D1)
► Enable the Servicetechniker (Service) access level and confirm your entry with OK.
If a password has been defined, a dialog box for entering the password opens.
► Enter the password and confirm with OK.
► Select the Optionen - Betriebsart...(Options − Control mode...) menu items.
Figure 4-24: Basic view of user interface for SC program (example SIPLACE D1)
The Betriebsart (Control mode) dialog box opens.
► Select SIPLACE Pro and confirm the setting with OK.
ACT with SSW 6xx / User Manual 07/2017 Edition
49
Figure 4-25: Dialog box operating mode switchover to SIPLACE Pro at the station (example SIPLACE D1)
► Press the START button on the machine.
The reference run is executed.
► Send the recipe / job to the station with the relevant setup and the ACT placement program.
► From the Optionen (Options) menu, select Modus ACT (ACT mode).
The ACT dialog box opens and the machine will automatically switch to Stand Alone mode.
Figure 4-26: Basic view of user interface for SC program (example SIPLACE D1)
After setting Modus ACT (ACT mode) an icon is displayed for ACT.
ACT with SSW 6xx / User Manual 07/2017 Edition
50
Figure 4-27: Dialog box after ACT mode has been set. Display: ACT icon
The Leiterplatteneingabe (Enter PCB) dialog box opens (Figure 4-28):
► Select the ACT board.
Figure 4-28: Dialog box: Enter PCB (example SIPLACE D1)
The Leiterplatteneingabe (Enter PCB) dialog box opens (Figure 4-29):
► Select the ACT board.
► Select the conveyor lane.
► Confirm your entry with OK.