SOM-1802-002_w.pdf - 第22页
19 AJBES-P 4.2 Data Explanation (A03_01), (A03_02), (A03_03), (A03_04), (A03_05),(A04_01) 0606-002 4.2.3 (A03) Carrier Data (A03_01) Carrier Data Refer to "Component Library for GXH Series" in the instruction m…
18 AJBES-P
(A02_17) Cmpnt thickness check [mm]
Refer to "Component Library for GXH Series" in the instruction manual
for details.
(A02_18) Vertical cmpnt data [mm]
Refer to "Component Library for GXH Series" in the instruction manual
for details.
(A02_19) Pick-up difference detn X, Y, and Angle
Refer to "Component Library for GXH Series" in the instruction manual
for details.
(A02_20) Angle control
Refer to "Component Library for GXH Series" in the instruction manual
for details.
(A02_21) Placement angle recognition (Reserved Data)
Refer to "Component Library for GXH Series" in the instruction manual
for details.
Reference
Reference
Reference
4.2 Data Explanation (A02_17), (A02_18), (A02_19), (A02_20), (A02_21)
0606-002
Reference
Reference
19 AJBES-P
4.2 Data Explanation (A03_01), (A03_02), (A03_03), (A03_04), (A03_05),(A04_01)
0606-002
4.2.3 (A03) Carrier Data
(A03_01) Carrier Data
Refer to "Component Library for GXH Series" in the instruction manual
for details.
(A03_02) Tape end detection
Refer to "Component Library for GXH Series" in the instruction manual
for details.
(A03_03) Tray Data
Refer to "Component Library for GXH Series" in the instruction manual
for details.
(A03_04) Shuttle tray data
Refer to "Component Library for GXH Series" in the instruction manual
for details.
(A03_05) Stick data
Refer to "Component Library for GXH Series" in the instruction manual
for details.
4.2.4 (A04) Placeable Data
(A04_01) Machine Name
Refer to "Component Library for GXH Series" in the instruction manual
for details.
Reference
Reference
Reference
Reference
Reference
Reference
20 AJBES-P
4.2.5 (B01) Shape Data
All component shapes are expressed based on the following packaged
condition.
Fig. 6 Top View of Packaged Components
(B01_02) Mold size
(1) X [mm] (Horizontal) and Y [mm] (Vertical)
Set Dimensions X and Y of the molded section.
Area Array
Fig. 7
0606-002
BGA
X
Y
Top View of Component
User Direction of Feed
4.2 Data Explanation (B01_02)