SOM-1802-002_w.pdf - 第55页
52 AJBES-P 7 . 3 Recognition Error IDs and Controlled Areas Basic System of Recognition Error IDs An error ID is expressed by 8 digits (hexadecimal) as follows. Z A B CC DDD Detailed Classification Small Classification M…
51 AJBES-P
7.2 Description of Recognition Error ID (Example)
Table 15
Recognition Error ID Description of Recognition Error, Cause, and Remedy
0 5 0 ** 001 Component was not found
(Cause 1) Check if the feeder is loaded with components other than
the specified ones (the components to be used).
(Cause 2) The vacuum suction force is too weak.
(Cause 3) An improper nozzle is selected for the components or
vice versa.
(Remedy 1) Check if proper components are used.
(Remedy 2) Check the vacuum pressure.
(Remedy 3) Check the parameters in the nozzle type data and the
component library data.
0 5 1 ** 001 Component was not detected.
(Cause)
(Remedy)
(Continued to the next page.)
[1 ] Recognition Error ID
The recognition error IDs (IDs displayed in the "ERROR" window)
are described in the numerical order.
[2] Error Name and Description
Described are the error name (item) and the description in the
"ERROR" window.
[3] Cause and Remedy
Described are the causes and remedial procedures of the errors in
"[2] Error Name and Description".
The causes and remedies are correlated as follows.
(Cause 1) Æ (Remedy 1)
(Cause 2) Æ (Remedy 2)
(Cause 3) Æ (Remedy 3)
[4] Continued to the next page
This indicates that the related contents are described subsequently on
the next page.
[4]
[1]
[3]
0606-002
7.2 Description of Recognition Error ID (Example)
[2]
52 AJBES-P
7.3 Recognition Error IDs and Controlled Areas
Basic System of Recognition Error IDs
An error ID is expressed by 8 digits (hexadecimal) as follows.
Z A B CC DDD
Detailed Classification
Small Classification
Middle Classification
Large Classification : Classification based on
individual recognition
functions
Classification Criteria : Distinction between
Recognition System and
Ordinary Errors
Classification Criteria
Table 16
Classification Criteria Classification of Recognition Functions
0 Ordinary Errors
1 Recognition System Errors
Large Classification
Table 17
Classification Criteria Classification of Recognition Functions
0 Recognition Internal Errors
1 Recognition Communication Errors
(Internal Processing)
2 Recognition Communication Errors
5 Component Recognition Errors
6 PEC Recognition Errors
7 Nozzle Recognition Errors
A Teaching Errors (Reserved)
Refer to the instruction manual of the main machine for the information
on recognition error IDs other than the above-described ones.
7.3 Recognition Error IDs and Controlled Areas
Note
0606-002
53 AJBES-P
7.4 Recognition Error IDs and Remedial Procedures
(1) Recognition Internal Errors
Z
A
B CC DDD
Detailed Classification: Detailed Classification
Small Classification: Small Classification
Middle Classification: Middle Classification
1:Error in Recognition internal
2:Error in Recognition internal
3:Error in Recognition internal
4:Error in Recognition internal
Large Classification (0)
Classification Criteria
When an error ID other than the described ones is issued, contact
our service personnel for some advice.
Table 18
Recognition Error ID Description of Recognition Error, Cause, and Remedy
0 0 1 00 001 Error in Recognition internal
0 0 1 00 002 Error in Recognition internal
0 0 1 00 *** Error in Recognition internal
0 0 2 00 *** Error in Recognition internal
0 0 3 00 *** Error in Recognition internal
0 0 4 00 *** Error in Recognition internal
1 0 * ** *** Error in Recognition internal
(Cause) Recognition Internal Error
(Remedy) Contact our service personnel for details.
7.4 Recognition Error IDs and Remedial Procedures
Notice
0606-002