OM-1058-002.pdf - 第104页
Tg0409-PM-SO 9.9 Style and Dimensions of Reel 9.9 Style and Dimensions of Reel Fig. 1 18 T able 31 Unit : mm 0410-002 103 (a) A capital letter given below which corresponds to nominal value of dimension A is entered into…
Tg0409-PM-SO
9.8 Minimum Bending Radius
0410-002 102
9.8 Minimum Bending Radius
Fig. 117 Minimum Bending Radius
When the tape is bent with the minimum bending radius, the tape shall not
be damaged, the components ahall maintain their position and direction in
the tape and shall be free from abnormalities such as damage.
Tape Width and Minimum Bending Radius
Table 30
Tg0409-PM-SO
9.9 Style and Dimensions of Reel
9.9 Style and Dimensions of Reel
Fig. 118
Table 31
Unit : mm
0410-002 103
(a) A capital letter given below which corresponds to nominal value of
dimension A is entered into in classification symbol of reel.
The letter symbols are
A:178 B:180 C:254 D:330 E:360 F:370 G:382
(b) Dimension W2 means overall thickness of the reel.
(c) When "W2" in the table is exceeded, the reel may be locked at its center
shaft to cause a rotation failure.
Note
1st Edition Issued Apr., 2003 Copying Prohibited
2nd Edition Issued Oct., 2004
Compiled and Distributed by
0410-002
Tg0409-PM-SO