OM-1058-002.pdf - 第52页
Tg0409-PM-SO 0410-002 51 5.3 Maintenance Method Fig. 78 Apply grease on the section of . Note Locating Notch Fulcrum Pin Every month Lubrication Apply New Molynoc Grease No. 1 with a thin bar . Overrun Stopper Fulcrum Pi…
Tg0409-PM-SO
Fig. 77
0410-002 50
Apply grease on the section of .
5.3 Maintenance Method
Note
Tape Feeder of
8 mm Width
Tape Feeders of
12 mm Width or more
Suppressor Holding Lever Fulcrum Pin
Every month Lubrication
Remove the fulcrum pin from the suppressor
hook section and apply New Molynoc Grease
No. 1, using a thin bar.
After so greasing, move the suppressor holding
lever several times to ensure a smooth coating.
Tape Feeder of
8 mm Width
Tape Feeders of
12 mm Width or more
Transfer Claw Fulcrum Section
Every month Lubrication
Apply New Molynoc Grease No. 1 from
the opening, using a thin bar.
Tape Feed Link Assembly Fulcrum Section,
Pick-up Position Adjustment Section
(Only for the tape feeder of 8mm width,
except for TF-0814)
Every month Lubrication
Apply New Molynoc Grease No. 1 from
the opening, using a thin bar.
Tg0409-PM-SO0410-002 51
5.3 Maintenance Method
Fig. 78
Apply grease on the section of .
Note
Locating Notch Fulcrum Pin
Every month Lubrication
Apply New Molynoc Grease No. 1 with a thin
bar.
Overrun Stopper Fulcrum Pin
Every month Lubrication
Apply New Molynoc Grease No. 1 with a thin
bar.
Tape Feeder of
8 mm or 12 mm Width
Tape Feeders of
16 mm Width or more
Overrun Stopper
Every month Lubrication
Apply New Molynoc Grease No. 1 with a thin
bar.
Tg0409-PM-SO
Fig. 79
0410-002 52
5.3 Maintenance Method
Shutter Driving Pin
Every month Lubrication
Open the suppressor and apply New Molynoc
Grease No. 1 using a thin bar.
Tape Feed Link Assembly Fulcrum Pin
Every month Lubrication
Apply New Molynoc Grease No. 1 using a thin
bar.
Pick-up Position Adjustment Pin
Every month Lubrication
Apply New Molynoc Grease No. 1 using a thin
bar.
Apply grease on the section of .
Note