OM-1058-002.pdf - 第26页

Tg0409-PM-SO 0410-002 25 3.2 T ape Feeder Attachment Procedure 3.2 T ape Feeder Attachment Procedure Fig. 41 (1) Open the feeder work area safety door of the chip mounter (TCM-X series). Before the tape feeder is set ont…

Tg0409-PM-SO0410-002 24

3. Tape Feeder Attachment

3.1 Items to be checked before attaching the tape feeder

on the feeder carriage

Before the tape feeder is attached on the feeder carriage of the chip mounter

(TCM-X series), check the following items:

• Make sure that the front hook is caught by the pin when the sup-

pressor is lowered.

• Make sure that the suppressor holding lever is caught by the

suppressor hook when the suppressor is lowered.

• Make sure that the cover tape is not caught in the suppressor.

• Make sure that there is no slack in the cover tape and that it is

properly taken up in the take-up reel socket through the roller

section.

• Turn the take-up reel socket in the proper direction and make sure

that the plate spring is inserted until locked.

• Make sure that there is a component on the pick-up position.

• Make sure that the tape excess is appropriate (10 mm or less).

When the tape feeder is attached on the feeder

carriage, always make sure that the feeder car-

riage has been returned to its home position.

CAUTION

When the tape feeder rises, the vacuum nozzle or

the machine might be damaged and leading to a

pick-up error.

Set the tape feeder correctly.

CAUTION

Tg0409-PM-SO0410-002 25

3.2 Tape Feeder Attachment Procedure

Fig. 41

(1) Open the feeder work area safety door

of the chip mounter (TCM-X series).

Before the tape feeder is set onto the feeder

carriage, make sure that there is no foreign

substance or dust on the feeder base mount-

ing surface.

If dirty, wipe it off with a rag.

Refer to "2.2.3 Feeder Work Area Safety

Doors of Section 1" in the Instruction

Manual Volume 1: Operation (Operator) of

main machine for TCM-X series for details

of the feeder work area safety door.

Reference

Feeder Work Area Safety Door

Feeder Carriage

Open

Note

Tg0409-PM-SO0410-002 26

3.2 Tape Feeder Attachment Procedure

Fig. 42

Fig. 43

For Small Reel

Mount the tape feeder body so that the tape

feeder front end is on the specified No. position

on the front feeder number plate.

For Large Reel

Attach the large reel holder to the specified No.

position on the rear feeder number plate.

Then mount the tape feeder body so that the

tape feeder front end is on the specified No.

position on the front feeder number plate.

Front Feeder No. Plate

Rear Feeder No. Plate

(2) Attach the tape feeder to the feeder

base with the specified feeder No.