OM-1058-002.pdf - 第19页

Tg0409-PM-SO (14) Attach the cover tape on the take-up reel socket. For tapes of 8 to 16 mm width, turn the cover tape more than half-way around the take-up reel socket, and catch it on the plate spring. Cut the cover ta…

Tg0409-PM-SO0410-002 17

Fig. 26 Attachement of Cover Tape

(13) Set the cover tape on the take-up reel

socket through the roller according to

the instruction label.

2.1 Attachment of Tapes

Fig. 27

Instruction Label

The instruction label is attached to each tape feeder.

If the cover tape is taken up incorrectly, it might cause a take-up

error or feeding error.

• Instruction Label Enlarged View

Tape Feeder of 8 mm Width TF-0814 Tape Feeders of 12 mm Width or more

(except for TF-0814)

Notice

Note

Tg0409-PM-SO

(14) Attach the cover tape on the take-up

reel socket.

For tapes of 8 to 16 mm width, turn the

cover tape more than half-way around the

take-up reel socket, and catch it on the plate

spring.

Cut the cover tape if it has come out 2 to 3

mm from the plate spring.

Fig. 29

0410-002 18

2.1 Attachment of Tapes

Plate Spring

Cover Tape

Catch 2 to 3 mm of cover tape

and cut.

Note

Fig. 28

For tapes of 24 mm or wider, stick the cover

tape on the take-up reel socket with cello-

phane tape.

If the take-up reel socket is not set securely, the

take-up reel socket might come off during opera-

tion leading to a machine breakdown.

Turn the take-up reel socket in the arrow direction

(Refer to "Note" in Fig. 28) and make sure that the

plate spring is inserted until locked.

CAUTION

Tg0409-PM-SO0410-002 19

2.1 Attachment of Tapes

If there is any slack, it might cause cover tape take-up error or

feed error.

(16) To feed the tape, press the feed lever as

if there was a component on the pick-up

position.

Refer to "2.3 Component Pick-up Position

Alignment" for details.

(17) The tape should be released from the

suppressor by 10 mm or less. If neces-

sary, cut any excess portion of the tape,

using scissors.

Do not tear the tape with your hand

because the pick-up position might be

deviated.

(15) Turn the take-up reel socket and pull the

cover tape so that there is no slack.

Fig. 30 No Slack on the Cover Tape

(OK)

Fig. 31 Slack on the Cover Tape

(NG)

Reference

Notice

10 mm or less

Fig. 32