OM-1058-002.pdf - 第38页

Tg0409-PM-SO 5.3.2 Maintenance in T ape Attachment and Product Change Check and clean the tape feeder as required in tape attachment and product change and by the condition of pick-up error . 0410-002 37 5.3 Maintenance …

100%1 / 105
Tg0409-PM-SO
5.3 Maintenance Method
5.3.1 Description of Maintenance in Each Section
Here the maintenance cycle for each section of the tape feeder.
The described procedure takes for example a tape feeder of 8 mm width
(except for TF-0814).
This applies to most tape feeders, except for those given special descrip-
tions.
How to Locate the Check, Cleaning, Lubrication and Adjustment
Spots
Fig. 60
*1 : Maintenance Spot
*2 : Maintenance Cycle and Contents
*3 : Details of Maintenance
0410-002 36
5.3 Maintenance Method
Reel Fulcrum Pin
Check and Clean with Each Product Change
Make sure there is no dirt (powder caused by
reel abrasion) on the reel fulcrum pin.
If dirty, remove it with a rag or air gun.
If the tape is fed while soiled
by reel abrasion, it might stick to
the greased section and so cause
a pick-up error.
*1
*2
*3
Notice
Tg0409-PM-SO
5.3.2 Maintenance in Tape Attachment and Product Change
Check and clean the tape feeder as required in tape attachment and product
change and by the condition of pick-up error.
0410-002 37
5.3 Maintenance Method
Fig. 61
Reel Fulcrum Pin (Fig. 62)
Tape End Detection Reflector (Fig. 63)
Sprocket (Fig. 67)
Shutter Driving Pin (Fig. 68)
Chute Section (Fig. 64)
Suppressor (Fig. 65)
Tape Peeling Section in Shutter Assembly (Fig. 66)
Tg0409-PM-SO
Fig. 62
0410-002 38
5.3 Maintenance Method
Table 6
Notice
Reel Fulcrum Pin
Check and Clean with Each Product Change
Make sure there is no dirt (powder caused by
reel abrasion) on the reel fulcrum pin.
If dirty, remove it with a rag or air gun.
If the tape is fed while soiled
by reel abrasion, it might stick to
the greased section and so cause
a pick-up error.
Small Reel Holder
Large Reel Holder
Reference
Drawing
Work Working Tools
Rag, Air GunFig. 62
Check,
Cleaning
Rag, Air Gun
Fig. 63 Air Gun, BrushCheck,
Cleaning
Fig. 64 Check,
Cleaning
Name
Reel Fulcrum Pin
Chute Section
Tape End Detection Reflector
Location to be maintained
Check
Fig. 65 Air Gun, Tweezers, Cotton SwabCheck,
Cleaning
Suppressor
Fig. 66 Rag, Air GunCheck,
Cleaning
Tape Peeling Section in Shutter
Assembly
Fig. 67 Rag, Air Gun, Tweezers, ToothbrushCheck,
Cleaning
Sprocket
Fig. 68 Rag, Air Gun, Tweezers
Check,
Cleaning
Shutter Driving Pin