OM-1058-002.pdf - 第30页

Tg0409-PM-SO Notice 0410-002 29 Unused tape feeders should be removed from the feeder car- riage. If a tape feeder is set onto the feeder carriage and not used for a long time during the machine operation, slack will occ…

Tg0409-PM-SO0410-002 28

(3) Push the locate lever in the direction

shown by the arrow in the figure and set

the locate pin on the feeder carriage.

A force of about 19 to 25 N (2 to 2.5 kgf) is

required to release the locate lever.

Fig. 46

3.2 Tape Feeder Attachment Procedure

(4) Make sure there is no backlash on the lo-

cate lever and that the tape feeder is fixed

securely.

When the tape feeder is mounted onto the

feeder carriage, lightly pull the locate lever in

the direction shown by the arrow in the fig-

ure.

Fig. 47

(5) After mounting the tape feeder, hold the

grip and lightly move it right and left to

make sure it is locked.

Fig. 48

Locate Lever

19 to 25 N

(2 to 2.5 kgf)

19 to 25 N

(2 to 2.5 kgf)

Locate Lever

9.8 N

(1 kgf)

9.8 N

(1 kgf)

Tg0409-PM-SO

Notice

0410-002 29

Unused tape feeders should be removed from the feeder car-

riage. If a tape feeder is set onto the feeder carriage and not used

for a long time during the machine operation, slack will occurs in

the tape, which might cause pick-up error.

3.2 Tape Feeder Attachment Procedure

If the machine is used with the tape feeder lifted,

it might cause machine breakdown or pick-up

error.

Mount the tape feeder securely on the feeder

carriage.

CAUTION

Tg0409-PM-SO0410-002 30

• Example of Tape Feeder Attachment Error

Fig. 49 Locate Lever Attachment Error

Fig. 49-1 Lifted Tape Feeder 1 Fig. 49-2 Lifted Tape Feeder 2

Fig. 50 Locate Lever Attachment Condition

Fig. 50-3

Not Attached

Fig. 50-2

Incomplete Attachment

Fig. 50-1

Correct Attachment

Section A Enlarged View

3.2 Tape Feeder Attachment Procedure

Section A