OM-1058-002.pdf - 第82页

Tg0409-PM-SO 8.2 Specifications of 8 mm T ape Feeder (For Embossed T ape) T able 18 0410-002 81 8.2 Specifications of 8 mm T ape Feeder (For Embossed T ape)

Tg0409-PM-SO

Fig. 92

(f) Use a taping on condition that the component itself or its electrical contact

is not protruded from the upper surface of tape.

Paper Taping

"Tape thickness (T) > component thickness"

(g) The shape of component pick-up surface should be wide and smooth

enough to be picked up by vacuum nozzles.

(h) Cover tapes sometimes become thicker than expected due to leafy and

fluffy leftovers produced through the production process. However, the

overall thickness should not exceed the value described as "T2" in the

table.

0410-002 80

8.1 Specifications of 8 mm Tape Feeders (For Paper Tape)

Tg0409-PM-SO

8.2 Specifications of 8 mm Tape Feeder (For Embossed

Tape)

Table 18

0410-002 81

8.2 Specifications of 8 mm Tape Feeder (For Embossed Tape)

Tg0409-PM-SO

Fig. 93 Fig. 94

Table 19

Embossed Carrier Type Taping

(a) A0 × B0 stands for the rectangle hole size on the tape.

The clearance between a rectangle hole and a component affects the pick-

up rate. Use the taping component with appropriate clearance specifica-

tions.

(b) The above specifications do not imply any guarantee of pick-up rate, etc.

The pick-up rate varies depending on how the main machine is adjusted

and the combination of the main machine and the tape feeders.

(d) 10 pitches cumulative tolerance P0 should be ± 0.2 mm.

(e) The cover tape should run smoothly along the sprocket holes. The edges

of the cover tape should be aligned with the carrier tape (taping).

The thickness of the cover tape should be 0.07 mm or less (including

adhesion).

0410-002 82

8.2 Specifications of 8 mm Tape Feeder (For Embossed Tape)

8.2.1 Referential Dimension for Taping

Note