SMN-Tape Feeder Manual(Eng Ver5).pdf - 第13页
Pr eface iii Concerning storage Basic items to be observed with regard to the storage of the SM feeder are as follows. Cautions against tape feeder storage and tape feeder reel replacement Storing or re placing the ree…
Samsung SM-Series Pneumatic Tape Feeder Users' Manual
ii
About Safety
In order to prevent damage to the property and to ensure safety, comply with the “must-
observe” items marked as follows.
Cautions to be exercised for the safety are described as follows in this manual.
Danger
If the instructions following this symbol are not
followed, serious accidents could occur, or death or
serious injury of the operator could happen. Be sure
to follow the instructions.
Warning
If the instructions following this symbol are not
followed, serious accidents could occur, or serious
injury of the operator could happen. Be sure to follow
the instructions.
Caution
If the instructions following this symbol are not
followed, damage of machine hardware, software, and
data could occur or the operator could be injured. Be
sure to follow the instructions.
The basic points to be observed while in using SM-Feeder are as follows.
Warning
Repair and adjustment of the tape feeder must be
performed by our C/S personnel or personnel in
charge who have received related training.
Do not perform work that may damage the power
source and associated pneumatic system devices.
Do not perform operation while hands are wet or
unclean.
Caution
Perform periodic inspection and maintenance of the
tape feeder.
Take care to ensure that the feeder does not receive
damage due to drop, impact, etc. during transportation
or installation.
Preface
iii
Concerning storage
Basic items to be observed with regard to the storage of the SM feeder are as follows.
Cautions against tape feeder storage and tape feeder reel replacement
Storing or replacing the reel while tape feeders are stacked may cause damage or
deformation to the components of the tape feeder. When replacing the tape feeder reel,
use the tape feeder replacement rack. Store the tape feeders on a stacking rack.
Do not store the feeders in places where temperature and humidity level are high
Avoid storing feeders in locations with high humidity or where the temperature is
higher than 40ºC. Rust or dewing may have negative effects on the driving part and
electronic circuit.
Do not store feeders in a location where magnetism is generated
If feeders are stored in a location where magnetism is generated, ensure that the area
from which the components on the reel are picked up is not magnetized.
Magnetization of such area may lead to problems with the smooth supply of
components.
Do not pile feeders up on one another
Place of high temperature and high humidity
Samsung SM-Series Pneumatic Tape Feeder Users' Manual
iv
Do not store feeders in the place where there is the presence of oil and organic
solvents
If the tape feeders are kept in a location along with oil and organic solvents, the tape
feeder may be damaged. Moreover, if the components on the reel are smeared with oil
and organic solvents, it will cause damage to the components on the reel or the
quality deterioration of completed PCB products.
Avoid collision
Take care to avoid collision between tape feeders or between the tape feeder and
another object. Such collision may cause invisible damage to the tape feeder or
deterioration of the performance and function of the tape feeder.
Do not store the feeders in a location where vibration exists
If tape feeders are kept in a place under severe vibration, it may loosen the connection
Avoid magnetism
Avoid all locations where there is the presence of oil
Avoid collision