SMN-Tape Feeder Manual(Eng Ver5).pdf - 第60页
Samsung SM-Series Pneumatic T ape Feeder Users' Manual 2-30 2.5.3. T ape Connection Method (Emboss T ype) 1. Cut the end part of the tape in use and the beginning part of the new tape by using scissors. [Greater tha…
Operation of the Tape Feeder
2-29
10. Cut off excess splicing tape with splicing vinyl tape attached on the reel.
11. Press and run with fingers so that the vinyl splicing tape adheres to the vinyl tape.
New Vinyl
Vinyl in use
Splicing Tip
Vinyl splicing tape
New Tape Tape in use
Samsung SM-Series Pneumatic Tape Feeder Users' Manual
2-30
2.5.3. Tape Connection Method (Emboss Type)
1. Cut the end part of the tape in use and the beginning part of the new tape by using
scissors.
[Greater than SM12mm]
Cut the reel at the center between pockets.
2. Peel off the vinyl tape on the leading end of the new tape (approximately 2mm).
Position for cutting with scissors Cutting the last end of the tape in use
Pocket containing a part
Pocket with no part
Tape in use
Operation of the Tape Feeder
2-31
[Greater than SM12mm]
3. Cut the H-shape tip to make it into I-shape.
4. Place the I-shape tip in the tool so that the burr is on the top.
5. Place the tape in use on the tip and move the pressing device downward.
Pocket containing a part
Pocket with no part
New Tape
Cut the reel at the center between
p
ockets