SMN-Tape Feeder Manual(Eng Ver5).pdf - 第18页

Samsung SM-Series Pneumatic T ape Feeder Users' Manual viii  Cautions when handling reel plate When the reel plate is bent by force with th e feeder being installed in the feeder base, it cannot return to the origi…

Preface

vii

feeder related parts, it may seriously impact the feeder quality.

 Handle the terminals with care

If terminals are damaged or smeared with foreign matter, the feeder may not operate

properly. Moreover, if a different power supply is connected, the feeder may be

damaged.

 Handle the serial number plate with care

If the serial number plate is damaged or lost due to carelessness during handling, after

sales service of the feeder may be difficult to obtain. Handle it with care.

Cautions to be taken when supplying air

Handle the terminals with care

Samsung SM-Series Pneumatic Tape Feeder Users' Manual

viii

 Cautions when handling reel plate

When the reel plate is bent by force with the feeder being installed in the feeder base,

it cannot return to the original state, causing a problem when feeding a part and

replacing a feeder. Therefore, do not bend the reel plate by force with the feeder

being installed in the feeder base.

Cautions when handling reel plate

Overview

1-1

Chapter 1. Overview

1.1. Configuration and name of feeder

1.1.1. SM 8mm Tape Feeder

(1) Clamping Lever (2) Drain Section (3) Manual Feeding Lever

(4) Control Section (5) Tape Guide (6) Reel Holding Section

(7) Indexing Section (8) Shutter (9) Clamping Section

(10) Dump Box

Figure 1-1. Configuration of the SM 8mm tape feeder

(7)

(2)

(5)

(10)

(8)

(9)

(3)

(1)

(4)

(6)