SMN-Tape Feeder Manual(Eng Ver5).pdf - 第33页
Operation of the T ape Feeder 2-3 2.1.2. Fixing the T ape Reel 8mm Tape Feeder Fix the tape reel as indicated in the figur e paying attention to the winding direction. Fix the 8mm tape feeder reel using a reel brake. F…
Samsung SM-Series Pneumatic Tape Feeder Users' Manual
2-2
SM12~16mm tape feeder
Figure 2-2. Opening the tape guide of the SM12~16mm tape feeder
24~88mm Tape Feeder
Figure 2-3. Opening the tape guide of the SM 24mm~88mm tape feeder
Operation of the Tape Feeder
2-3
2.1.2. Fixing the Tape Reel
8mm Tape Feeder
Fix the tape reel as indicated in the figure paying attention to the winding direction.
Fix the 8mm tape feeder reel using a reel brake.
Figure 2-4. Locking the tape reel of the 8mm tape feeder
12~88mm Tape Feeder
12mm~88mm tape feeders are fixed as if inserting a reel into the ‘ㄷ’-shaped slot.
Figure 2-5. Locking the tape reel of the 12mm~88mm tape feeder
‘ㄷ’-shaped slot
Reel Brake
Samsung SM-Series Pneumatic Tape Feeder Users' Manual
2-4
2.1.3. Installing the component tape and Exit of the carrier tape
Pass the tape through groove A as shown in the figure below.
Figure 2-6. Installing path of the tape
The tape consists of three parts, the upper cover tape, the carrier tape, and the bottom
cover tape. In general, the carrier tape and the upper cover tape are not separated, so
together they are called the carrier tape.
Figure 2-7. Composition of the tape
After passing the upper tape and transportation tape between the tape guide slot and main
frame as shown in the figure, strip off about 35cm of the upper cover tape from the end,
Strip off about 35cm of the upper cover tape from the end, and pass it through the tape slit
as shown in the figure below.
Caution
When the distance from the end of the feeding tape to the
pickup position is short, the tape may get caught.
Therefore, ensure that the distance is sufficiently long
before use.
상단 커버 테이프
전송 테이프
하단 커버 테이프
Carrier tape
Bottom cover tape
Upper cover tape
Groove A
Groove B