SMN-Tape Feeder Manual(Eng Ver5).pdf - 第80页
Samsung SM-Series Pneumatic T ape Feeder Users' Manual 3-14 3.4. Feeder Registration Regarding feeder registration, please refer to ‘Administrator ’ s Guide(Chapter8. Feeder Setup)’ or ‘EasyOLP Manual’ for SM series…
Maintenance
3-13
3.3.5. When the vinyl is not discharged smoothly
When treating the discharge vinyl at random
When using the discharge vinyl by twisting or binding it, the vinyl may not be discharged
smoothly.
☞ Install the tape again referring to “2.1 Installing Tape”. When installing the tape, the
discharge vinyl has no twisted or bound part.
When discharging the vinyl abnormally
Even though the discharge vinyl is installed properly, if the vinyl is discharged
abnormally, check the following.
- Reverse rotation of the discharge gear
- Spring wear or cutoff
- Damage to link part
☞ Check for the problem and contact our designated C/S (STS) or local agent.
Samsung SM-Series Pneumatic Tape Feeder Users' Manual
3-14
3.4. Feeder Registration
Regarding feeder registration, please refer to ‘Administrator’s Guide(Chapter8. Feeder
Setup)’ or ‘EasyOLP Manual’ for SM series equipment.
Maintenance
3-15
3.5. Recommended Spare Part List
3.5.1. 8mm Tape Feeder
Front
(14)
(11)
(12)
(9)
(17)
(8)
(5)
(2)
(3)
(10)