SMN-Tape Feeder Manual(Eng Ver5).pdf - 第57页
Operation of the T ape Feeder 2-27 2. Peel off the vinyl tape on the leading end of the new tape (approximately 2mm) . 3. Place the H-shape tip in the tool so that the burr is on the top. 4. Place the tape in use in the …
Samsung SM-Series Pneumatic Tape Feeder Users' Manual
2-26
2.5.2. Tape Connection Method (Paper Type)
[Based on 8mm]
1. Cut the end part of the tape in use and the beginning part of the new tape by using
scissors.
Cutting with scissors for
general use
Position for cutting with scissors
Cutting with scissors for
splicing
Cutting with scissors for splicing
Cutting with scissors for general use
Cutting together with vinyl tape
Operation of the Tape Feeder
2-27
2. Peel off the vinyl tape on the leading end of the new tape (approximately 2mm).
3. Place the H-shape tip in the tool so that the burr is on the top.
4. Place the tape in use in the H-shaped tip and move the pressing device.
When the vinyl tape is peeled off
Peeling off the vinyl tape using a tool
when it was not peeled off in advance
Samsung SM-Series Pneumatic Tape Feeder Users' Manual
2-28
5. Place the tape to be connected on the H-Shaped tip and move the pressing device
downward.
6. Connect the tapes by manipulating the handle of the tool.
7. Move the pressing device upward. Push the handle of the tool and release it, and then
remove the connected tape from the tool.
8. Cut the vinyl connecting tape by using scissors.
9. Attach the vinyl splicing tape as shown below by using the jig for vinyl splicing tape.
View of splicing with a tip
(Back side of tape)