SMN-Tape Feeder Manual(Eng Ver5).pdf - 第54页

Samsung SM-Series Pneumatic T ape Feeder Users' Manual 2-24 2.5. Splicing Tp ae 2.5.1. Components for S plicing T ool Set  Splicing T ool  Splicing T ip H-T ype Tip (for paper) I-T ype T ip (for emboss tape)  V i…

Operation of the Tape Feeder

2-23

Pushing the grip forward, fix the feeder to the feeder base. At this time, confirm if the

feeder is firmly fixed to the feeder base.

Caution

If the movement of the grip is hard and abnormal while

fixing the SM feeder into the feeder base by pushing the

grip, stop fixing the SM feeder into the feeder base for a

moment and check if there is any foreign material in the

feeder base slot. Fix the SM feeder into the feeder base

only when all conditions are normal.

2.4. Removing Feeder from Feeder Base

To remove the feeder from the feeder base, first confirm that the machine is in idle state.

Then release the locking of the feeder by pulling back the grip, grasping the handle with

the left hand, and removing the feeder while moving it backward.

Caution

Be careful as the feeder may become deformed or

damaged by falling, or by collision of the feeder tape guide

or locker with the feeder base at the moment the feeder is

completely removed from the slot of the feeder base.

Samsung SM-Series Pneumatic Tape Feeder Users' Manual

2-24

2.5. Splicing Tpae

2.5.1. Components for Splicing Tool Set

 Splicing Tool

 Splicing Tip

H-Type Tip (for paper) I-Type Tip (for emboss tape)

 Vinyl splicing tape

(For 8mm tape) (For 12mm tape)

(For 16mm tape) (For 24mm tape)

Operation of the Tape Feeder

2-25

 Scissors for Splicing

 Jig for Vinyl Splicing Tape

 Portable Splicing Tool