Maintenance Reference(CP45FV) Eng.pdf - 第53页
W eekly Inspection 3-15 Pressure Gauge & Auto Switch Air Filter & Auto Draine r Regulator Pressure Gauge Figur e 3-10. Inspection for Pneumatics Solution Adjust the pneumatics setting by rotating the regulator CW…
Samsung Component Placer CP45FV Series Maintenance Reference
Check if uneven wear occurred in the fixed slot.
Solution
Caution
Remove foreign matter prior to placement as the foreign
matter on the feeder surface may cause problem during
actual mounting.
Please contact the designated C/S company in case of
uneven wear as it may affect the reliability of component
pickup.
3.2.6.2. Adjustment of Multi Cylinder Speed
Inspection
Check if the working speed of the cylinder driving the tape feeder causes any
problem in relation to the placement of the components.
Speed Control Valve
Figure 3-9. Speed Control Valves
Solution
Adjust using the speed control valve for the multi-cylinders.
3.2.7. Pneumatics
3.2.7.1. Pressure Settings
Inspection
Check to see if the supplied pneumatics is appropriate for the configured pressure.
3-14
Weekly Inspection
3-15
Pressure Gauge & Auto Switch
Air Filter & Auto Drainer
Regulator
Pressure Gauge
Figure 3-10. Inspection for Pneumatics
Solution
Adjust the pneumatics setting by rotating the regulator CW(Clockwise) or
CCW(Counter Clockwise).
Caution
Setting the pressure incorrectly could harm the machine
performance. Set the pressure correctly.
3.2.7.2. Air Filter & Auto Drainer
Inspection
Check to see if there are any moisture or water inside the air filter.
Check to see if the filter is clogged.
Check if the filter color has changed to yellow.
Check to see if moisture is being properly drained out through the drainer.
Check to see if the tube is properly connected to the drainer.
Warning
Changing the air filter without cutting off the air pressure
could result in personal injury.
Be sure to cut off air pressure before chaing the air filter.
Samsung Component Placer CP45FV Series Maintenance Reference
Solution
Lower the locking mechanism or handle for the air filter tray and turn it sideways to
remove the tray.
Remove the contaminated filter.
Install the new filter reversing the above procedures.
3-16