Maintenance Reference(CP45FV) Eng.pdf - 第64页

Samsung Component Placer CP45FV Series Maintenance Guide Clean the ball screw of any contamination or dust, and apply grease if necessary .    4.2.2.4. Y -axis Ball Screw Inspection Check the ball screw for discolorat…

100%1 / 128
Lubricant Method
4-7
L/M Guide Block
L/M Guide Rail
Coupling
Figure 4-3. Y-axis L/M Guide
Solution
Grease nipple
Clean the rail of any contamination or dust, and apply grease if necessary.
4.2.2.3. X-axis Ball Screw
Inspection
Check the ball screw for discoloration or dust.
Check the lubricants on the ball screw. Insufficient lubricants on the rails could cause
unusual noise during operation of the machine.
Solution
Samsung Component Placer CP45FV Series Maintenance Guide
Clean the ball screw of any contamination or dust, and apply grease if necessary.
4.2.2.4. Y-axis Ball Screw
Inspection
Check the ball screw for discoloration or dust.
Check the lubricants on the ball screw. Insufficient lubricants on the rails could cause
unusual noise during operation of the machine.
Y-axis ball screw grease
Figure 4-4. Y axis ball screw grease nipple
Solution
Clean the ball screw of any contamination or dust, and apply grease if necessary.
Apply grease through the grease nipple.
4.2.3. Conveyor
4.2.3.1. Lead Screw for Adjusting Conveyor Width
Inspection
Look for components, dust or discoloration of the lead screw.
4-8
Lubricant Method
4-9
Insufficient lubricant on the lead screw can cause difficulty in adjusting the width of
the conveyor. Check the lubricant condition.
Lead Screw
Srevo Motor
Belt & Pulley
L/M Guide Rail
Figure 4-5. Lead Screw for Adjusting Conveyor Width
Solution
Eliminate the dust and contamination and apply grease to the lead screw if necessary.
4.2.3.2. L/M Guide Rail for Adjusting Conveyor Width
Inspection
Look for components, dust or discoloration of the rails.
Insufficient lubricant on the rails can cause difficulty in adjusting the width of the
conveyor. Check the lubricant condition.
Solution
Eliminate the dust and contamination from the rails and apply grease to the lead
screw if necessary.
Apply grease through the grease nipple.
4.2.3.3. Chain for Adjusting Conveyor Width On Manual Operation
Inspection
Check for contamination on the chain.
Insufficient lubricant on the chain could cause difficulties in adjusting the conveyor
width. Check the condition of the lubrication.