Maintenance Reference(CP45FV) Eng.pdf - 第66页

Samsung Component Placer CP45FV Series Maintenance Guide Belt Chain Figur e 4-6. Chain for Adjusting C onveyor W idth On Manual Operation Solution Remove the foreign matter and apply grease(EP2) if the chin is too dry . …

Lubricant Method

4-9

 Insufficient lubricant on the lead screw can cause difficulty in adjusting the width of

the conveyor. Check the lubricant condition.

Lead Screw

Srevo Motor

Belt & Pulley

L/M Guide Rail

Figure 4-5. Lead Screw for Adjusting Conveyor Width

Solution

Eliminate the dust and contamination and apply grease to the lead screw if necessary. 



4.2.3.2. L/M Guide Rail for Adjusting Conveyor Width

Inspection

Look for components, dust or discoloration of the rails.

Insufficient lubricant on the rails can cause difficulty in adjusting the width of the

conveyor. Check the lubricant condition.

Solution

Eliminate the dust and contamination from the rails and apply grease to the lead

screw if necessary.

Apply grease through the grease nipple.

4.2.3.3. Chain for Adjusting Conveyor Width On Manual Operation

Inspection

Check for contamination on the chain.

Insufficient lubricant on the chain could cause difficulties in adjusting the conveyor

width. Check the condition of the lubrication.

Samsung Component Placer CP45FV Series Maintenance Guide

Belt

Chain

Figure 4-6. Chain for Adjusting Conveyor Width On Manual Operation

Solution

Remove the foreign matter and apply grease(EP2) if the chin is too dry. 

(Annual periodical inspection)

4-10

Definition of Consumables and their Time of Replacement

Chapter 5. Definition of Consumables and

their Time of Replacement

5-1

5.1. Definition of Consumables

Consumables refer to components that cause gradual loss of the machine functions due to

continual tear while using the machine.

The consumables must be replaced through the inspection of the machine when problems

occur. Even though no problem is found during inspection of the machine, if their use

exceeds the replacement cycle, it should be replaced.

The consumables include wear parts as well as those with limited time of use.

5.2. Replacement Period For wear and tear part

Table 5-1. Replacement period list

Check-up List

Major