Maintenance Reference(CP45FV) Eng.pdf - 第62页
Samsung Component Placer CP45FV Series Maintenance Guide X- a xis L/ M Gu ide Ra il & Bloc k Figur e 4-2. X-axis L/M Guide Rail & Block Solution Clean any contamination or dust on the rail, and apply grease if ne…
Lubricant Method
4-5
4.2. Lubrication and Grease Application
Caution
It may shorten the average life span of a machine if grease
not specified by our company is applied on the machine.
Use the grease specified by our company.
4.2.1. Head
Inspection
Check the Ball Spline or the rail for discoloration or dust.
Noise may be generated if the lubricant has become too dry. Therefore, check the
state of lubrication.
LM Guide Rail
Ball Spline
Figure 4-1. Head Assembly Application
Solution
Remove any dust or foreign matter first and, if necessary, apply grease as thin as
possible on the ball spline or rail surface.
4.2.2. X-Y Frame
4.2.2.1. X-axis L/M Guide Rail
Inspection
Check the rail for discoloration or dust.
Check the lubricants on the rails. Insufficient lubricants on the rails could cause
unusual noise during operation of the machine.
Samsung Component Placer CP45FV Series Maintenance Guide
X-axis L/M Guide Rail & Bloc
k
Figure 4-2. X-axis L/M Guide Rail & Block
Solution
Clean any contamination or dust on the rail, and apply grease if necessary.
4.2.2.2. Y-axis L/M Guide Rail
Inspection
Check the rail for discoloration or dust.
Check the lubricants on the rails. Insufficient lubricants on the rails could cause
unusual noise during operation of the machine.
4-6
Lubricant Method
4-7
L/M Guide Block
L/M Guide Rail
Coupling
Figure 4-3. Y-axis L/M Guide
Solution
Grease nipple
Clean the rail of any contamination or dust, and apply grease if necessary.
4.2.2.3. X-axis Ball Screw
Inspection
Check the ball screw for discoloration or dust.
Check the lubricants on the ball screw. Insufficient lubricants on the rails could cause
unusual noise during operation of the machine.
Solution