Maintenance Reference(CP45FV) Eng.pdf - 第67页
Definition of Consumables and their T ime of Replacement Chapter 5. Definition of Consumables and their T ime of Replacement 5-1 5.1. Definition of Consumables Consumables refer to components that cause gr adual loss of …

Samsung Component Placer CP45FV Series Maintenance Guide
Belt
Chain
Figure 4-6. Chain for Adjusting Conveyor Width On Manual Operation
Solution
Remove the foreign matter and apply grease(EP2) if the chin is too dry.
(Annual periodical inspection)
4-10

Definition of Consumables and their Time of Replacement
Chapter 5. Definition of Consumables and
their Time of Replacement
5-1
5.1. Definition of Consumables
Consumables refer to components that cause gradual loss of the machine functions due to
continual tear while using the machine.
The consumables must be replaced through the inspection of the machine when problems
occur. Even though no problem is found during inspection of the machine, if their use
exceeds the replacement cycle, it should be replaced.
The consumables include wear parts as well as those with limited time of use.
5.2. Replacement Period For wear and tear part
Table 5-1. Replacement period list
Check-up List
Major
Category
Sub
Category
Description
Check
Period
Replacement
period
Remark
Nozzle Holder
Refer to “3.1.1
Nozzle
Holder”
Weekly
3years
Contact our C/S For
Replacing
V-Ring
3years
Material Number:
J6304001A
Filter
Refer to “3.2.2
Vacuum
Filter”
Monthly Six Months
Contact our C/S For
Replacing
Head & ANC
Nozzle
Refer to “2.1
Nozzle”
Daily
2year
Contact our C/S For
Replacing
Conveyor Belt
Refer to “3.2.4.1
PCB
Conveyor Belt”
Monthly
3years
Contact our C/S For
Replacing
Pneumatics
Filter &
Drainer
Refer to “3.2.7.2 Air Filter
& Auto Drainer
”
Monthly
1year
Contact our C/S For
Replacing
Cooling FAN
Filter (For
External Fan)
Refer to “3.1.3
Cooling
Fan
”
Weekly Six Months
Contact our C/S For
Replacing
Memo
Setting the replacement period for parts
Based on the regulated use environment. If the use environment is poor, the
intervals for part inspection and replacement can be shortened.
In the above table, C/S refers to our designated C/S company (STS) or our overseas local
agents.