TR3-GL541-1_1E.pdf.pdf - 第20页
5. Safety Labels To warn the operator of hazards, safety labels are attached to the machine at the positions indicated in the figure below. Familiarize yourself with each label and its message before operating the machin…
Safety Guidelines
Edition1.0 9 GL-541E Level 3 Reference
Wear protective gloves when handling glue or solder
paste.
● When handling glue or solder paste, wear protective gloves to avoid
solder or glue coming into contact with the skin.
● When using solvent to clean machine parts, use protective gloves,
eyewear, a face shield and an apron.
● In case glue, solder paste, etc. comes into contact with the skin, use
plentiful amounts of water, cleaning fluid or alcohol to remove the
glue or solder paste.
All chemicals and industrial waste must be handled in
compliance with local regulations.
CAUTION
5. Safety Labels
To warn the operator of hazards, safety labels are attached to the machine at the
positions indicated in the figure below.
Familiarize yourself with each label and its message before operating the machine.
GL541-m62E
Never insert your hand
inside an operating machine.
Moving parts may cause injury.
DANGER
1
2
2
1
1
2
A
B
B
1
<WARNING>
DISCONNECT POWER PRIOR TO SERVICING
3
3
A
B
High Voltage
Keep hands and
clothing well clear
of the moving conveyor
High temperatures
Safety Guidelines
Edition1.0 10 GL-541E Level 3 Reference
6. The EMERGENCY STOP Button
In the event of an emergency, press the EMERGENCY STOP button located on the
machine at the position indicated in the figure below.
EMERGENCY STOP button on the front of the machine
EMERGENCY STOP button
GL5MF002
Safety Guidelines
Edition1.0 11 GL-541E Level 3 Reference