TR3-GL541-1_1E.pdf.pdf - 第26页
1.2 T emperature Regulator (Main) 1. Present temperature display The present temperature displays here. An error will display if an error occurs in the temperature regulator. 2. #1 Warning lamp When the controlled temper…
Notes:
Chapter 1 1.1 Temperature Control Unit
Edition 1.1 1-2 GL-541E Level 3 Reference
1.2 Temperature Regulator (Main)
1. Present temperature display
The present temperature displays here. An error will display if an error
occurs in the temperature regulator.
2. #1 Warning lamp
When the controlled temperature exceeds 50 degrees (AL-1:
Temperature Upper Limit Value), this lamp comes on. When this lamp
comes on, the message "Heater Alarm" displays on the GL-541E monitor.
3. #2 Warning lamp
When the controlled temperature exceeds the permissible range by more
than ± 5 degrees, this lamp comes on. When this lamp comes on, the
message “Setup temperature ready” displays on the GL-541E monitor.
4. Setup keys
These are used to raise or lower the setup temperature.
Note: Do not change the AL-1 or AL-2 settings as this may cause damage to the equipment.
OUT
°C
PV
SV
ALM1 ALM2
omRon
E5CJ
1
2
3
4
5
6
7
8
GL541-m59E
1. Temperature display
2. #1 warning lamp
3. #2 warning lamp
4. Setup key (up /down)
5. Mode key
6. Level key
7. Output operation display lamp
8. Setup display
Chapter 1 1.2 Temperature Regulator (Main)
Edition 1.0 1-3 GL-541E Level 3 Reference
5. Mode key
The temperature display changes as shown below when this key is
pressed.
Note: Do not change the AL-1 or AL-2 settings as this may cause damage to the equipment.
6. Level key
Normally this key should not be pressed.
Note: Changing this value will result in damage to the machine.
7. Output operation display lamp
This lamp comes on when current is output to the heater.
8. Setup display
This displays the setup temperature value.
GL541-m63E
Fixed value
(for alarm)
Fixed value
(for message)
Controlled Temperature
Press key
Press key
Chapter 1 1.2 Temperature Regulator (Main)
Edition 1.0 1-4 GL-541E Level 3 Reference