TR3-GL541-1_1E.pdf.pdf - 第4页
About This Manual This manual contains important machine maintenance information for the user. The manual content is intended for specialized technicians who are familiar with the systems used in this machine. Please rea…
Notice
1. All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This
manual may not, in whole or in part, be reproduced by any means (electronic, mechanical or
otherwise), or reused in any way, without the prior written permission of Fuji Machine
Manufacturing Co., Ltd.
2. Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for any situations that may arise as
a result of the use of this manual.
3. Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual
without notice.
4. Every effort has been made to ensure that this manual is correct in every detail. However, please
contact Fuji in the unlikely event that errors or omissions are detected.
Copyright 2000 by Fuji Machine Manufacturing Co., Ltd. All Rights Reserved.
is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the
following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,
Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the
U.S.A.
Fuji Machine Manufacturing Co., Ltd. serves its customers from the following locations:
Fuji Machine Manufacturing Co., Ltd.
19 Chausuyama Yamamachi, Chiryu, Aichi, 472-8686 Japan
Tel: (0566) 81 - 2111 Fax: (0566) 83 - 1140
Fuji America Corporation
171 Corporate Woods Parkway, Vernon Hills, IL. 60061 USA
Tel: (847) 913-0162 Fax: (847) 913-0186
Fuji Machine Mfg (Europe) GmbH
Peter-Sander-Str. 43, D-55252 Mainz-Kastel Germany
Tel: 06134-202120 Fax: 06134-202200
Fuji do Brasil Maquinas Industriais Ltda.
Rua Joao Cachoeira,
128 Itaim Bibi, Sao Paulo, SP 04535-000 Brazil
Tel: 11-3064-7650 Fax: 11-852-6833
Fuji Machine Philippines, Inc.
Warehouse 888 Don Mariano Lim
Industrial Complex (La Fuerza Compound) Alabang, Zapote Rd.,
Almanza Uno Las Pinas City, Philippines
Tel: (02) 809-4565 Fax: (02) 807-2767
Fuji Singapore Office
C/O Mecomb Singapore Limited
Sime Darby Centre, 896 Dunearn Road #04-03A, Singapore 589472
Tel: 4675952 Fax: 4693758
Fuji Malaysia Office
C/O Mecomb Malaysia Sdn Bhd
2487, Jalan Sultan Azlan Shah, 11700 Penang, Malaysia
Tel: (04) 656-4002 Fax: (04) 656-2941
Fuji Taiwan Office
C/O Ascentex Industry Corp.
3 Fl, No. 396, Sec. 1, Nei Hu Rd., Taipei, Taiwan R.O.C.
Tel: (02) 8797-8716 Fax: (02) 8797-8717
R
About This Manual
This manual contains important machine maintenance information for the user.
The manual content is intended for specialized technicians who are familiar with the
systems used in this machine.
Please read this manual carefully in order to ensure safe and efficient machine
maintenance.
Some of the machine names used in this manual are not the formal machine names.
(Formal machine name) (Notation used in this manual)
FUJI GL-541E GL-541E
Manual Structure
This manual consists of the following four chapters.
Safety Guidelines
Chapter 1 Setup
Chapter 2 Vision System
Chapter 3 Proper Data
About This Manual
Edition 1.1 i GL-541E Level 3 Reference
Page Layout
Each page indicates the chapter number, section title and number, body, manual name,
page number, and the edition number.
Chapter number
The chapter number to which each section belongs is shown on the header on each page.
The manual is made up of four chapters as detailed earlier in this section.
Section number and title
The title of each chapter is shown in the header on each page. Each part may contain one
or more sections.
Section title
Each chapter may be divided into several sections. The section number is composed of
the number of the chapter to which the section belongs, followed by a sequential number
for each section.
1.1 Temperature Control Unit
Operation Panel
1. Temperature regulator (Main)
Input the temperature under which the glue is used. This regulator
controls the current which is sent to the heater so that the temperature
reaches the set value. This regulator is used to adjust the heater
temperature.
2. Temperature regulator (for cooler unit)
Input the temperature under which the glue is used. This regulator
switches the air flow to the cooler when the supplied air temperature is
higher than the setup value.
3. Thermostat power switch
Normally, when the power to the machine is switched on, the thermostat
power switch should be ON. However, be sure to set the thermostat
power switch to OFF when the machine is in pass mode.
OUT
°C
PV
SV
ALM1 ALM2
omRon
E5CJ
ON
°C
AL
SP AL
OMRON E5CS
COOLER ON
TEMP ADJ.
POWER ON
THERMOSTAT
THERMOSTAT
ON OFF
1
2
3
1. Temperature regulator
2. Temperature regulator (for starting cooler)
3. Power switch
GL541-m60E
Chapter 1 1.1 Temperature Control Unit
Edition 1.1 1-1 GL-541E Level 3 Reference
Chapter number
Section number and title
Section title
Body
Edition number
Page number
Manual name
GL541TC1
About This Manual
Edition 1.1 ii GL-541E Level 3 Reference