00196806-01_IM_EDM_1.9_EN.pdf - 第39页

Installation Manu al SIPLACE Engine ering Data Manag er (EDM) Version 1 .9 02/2011 Edition 39 / 65 5.2.3.21 Client workflow configuration Key: clientW orkflowConfig Type: File Default: Clientworkf lowconfig.xm l Valid fo…

100%1 / 65
Installation Manual SIPLACE Engineering Data Manager (EDM) Version 1.9 Issue 02/2009
38
5.2.3.20 Compression type and level
Key:
compressionType
Type:
Enum
Values:
None
Zip
Bzip
Default:
Zip
Valid for:
Line server
Master server
Clearing pool
Description: Compression mode for the data transfer. The setting must be identical
throughout the entire system.
The default setting represents a good compromise between the compression
ratio and processing time. If extremely large amounts of data are transferred by
the customer, it may be necessary to set the compression to Bzip. This method
offers a much higher compression ratio than Zip, but at the cost of longer
processing times. Compression should only be switched off when the amount of
data is always very small (< 4MB).
Installation Manual SIPLACE Engineering Data Manager (EDM) Version 1.9 02/2011 Edition
39 / 65
5.2.3.21 Client workflow configuration
Key:
clientWorkflowConfig
Type:
File
Default:
Clientworkflowconfig.xml
Valid for:
Line server
Description:
Definition of the workflow on the EDM Client. The file name is specified relative to
the configuration folder.
5.2.3.22 Service remoting endpoint
Key:
serviceRemotingEndpoint
Type:
String
Valid for:
Line server
Description:
.NET remoting endpoint for communication between the EDM Client and EDM Line
Server. The entry has the format:
[servername]:[tcpport]/EdmService
5.2.3.23 Application template storage
Key:
templateStorage
Type:
Path
Default:
[AppDir]\templateStorage
Valid for:
Line server
Master server
Description:
Storage location for application templates. The path can be specified absolutely or
relative to the EDM installation folder.
5.2.3.24 Assigned SPI lines
Key:
spiLines
Type:
Section
Valid for:
Line server
Description:
Contains the SPI lines assigned to the Line Server. This entry is used for the
EDM VDM BLOB extension and for functions in push mode.
The entries have the format <line path="path"/>, where "path" is the
unqualified full path of the line.
Installation Manual SIPLACE Engineering Data Manager (EDM) Version 1.9 Issue 02/2009
40
5.2.3.25 SQL database access
Key:
sqlDataSource
Type:
String
Valid for:
Master server
Clearing pool
Description:
Access to the SQL server to store the change notifications, the objects changed on
the lines and information on push mode (EDM database).
This setting does not refer to the SIPLACE Pro database.
5.2.3.26 SQL user name
Key:
sqlUserName
Type:
String
Valid for:
Master server
Clearing pool
Description:
User name for access to the SQL server.
5.2.3.27 SQL password
Key:
sqlUserPassword
Type:
String
Valid for:
Master server
Clearing pool
Description:
Encrypted password for access to the SQL server. This cannot be changed
manually in the current version.
5.2.3.28 Starting point
Key:
startingPoints
Type:
Section
Valid for:
Master server
Description:
Configures allowable starting points in the application template.
The entry has the format
<objectServerType value="ObjectServerType"/>
5.2.3.29 Comment categories
Key:
CommentCategories
Type:
Section
Valid for:
Master server