00196806-01_IM_EDM_1.9_EN.pdf - 第54页

Installation Manu al SIPLACE Engine ering Data Manag er (EDM) Version 1 .9 Issue 02/2009 54 Figure 15 Curren t configuration op t ions for client work flows 5.3.3 Default configuration See 7.2. Clie nt W or k flow.xm l

Installation Manual SIPLACE Engineering Data Manager (EDM) Version 1.9 02/2011 Edition

53 / 65

path)

Table 10 Additional settings for "fixed objects"

An example for Table 10:

</customConfig>

Installation Manual SIPLACE Engineering Data Manager (EDM) Version 1.9 Issue 02/2009

Figure 15 Current configuration options for client workflows

5.3.3 Default configuration

See 7.2. ClientWorkflow.xml

Installation Manual SIPLACE Engineering Data Manager (EDM) Version 1.9 02/2011 Edition

55 / 65

5.4 EDM configuration

5.4.1 Application templates

As already mentioned, the application templates depict the static part of the customer process that is

related to the data. They primarily define the object types to be transferred and whether or not they will be

overwritten.

5.4.1.1 General settings

Figure 16 General settings for application templates

The general settings include:

• Type of data transfer. Currently, you can only select "Pull Mode" or "Forced Pull Mode".

• Starting Point specifies the object type for which this template can be valid. A template can only be valid

for one object type at a time, though. It is possible, of course, to define more than one template for an

object type.

• Objects found in the default folder and all its subfolders can be subsequently specified by the line

engineer for pushing from the master.

• An optional comment.

5.4.1.1.1 Pull mode

No additional settings can be specified for this type of data transfer between the Master Server and Line

Servers.

5.4.1.1.2 Forced pull mode

For this type of data transfer, the time after which the data preparation engineer will be notified that no new

data has been pulled for the line must be specified via "Configure". The time is specified in hours.