SOM-2079-001_w.pdf - 第105页
102 SOM-2079 1005-001 異常 ID 異常名、説明、要因および復帰方法 48010f Device Inspect Time-Out of Recognition ON Response ----- 480110 Device Inspect Time Out of Image Capture ----- 480111 Device Inspect Time Out of Image Capture Cancel --…
101
SOM-2079
1005-001
6.8 部品認識
Table 10
異常 ID 異常名、説明、要因および復帰方法
480101 Device Inspect
Failed in Issuing the Lighting Selection Command.
-----
480102 Device Inspect
Error Response of Lighting Selection Command!
-----
480103 Device Inspect
Delayed Response of Lighting Selection Command!
-----
480104 Device Inspect
Failed in Issuing the Image Capture Command.
-----
480105 Device Inspect
Error Response of Image Capture Command!
-----
480106 Device Inspect
Failed in Issuing the Recognition Command.
-----
480107 Device Inspect
Delayed Response of Image Capture Command!
-----
480108 Device Inspect
Error Response of Recognition Command!
-----
480109 Device Inspect
Error Response of Recognition Command (Delayed Recognition)!
-----
48010a Device Inspect
Error in Recognition-Related Data Transfer!
-----
48010b Device Inspect
Failed in Issuing the Recognition Interrupt Command.
-----
48010c Device Inspect
Error Response of Recognition Interrupt Command!
-----
48010d Device Inspect
Time-Out of Recognition Interrupt Processing
-----
48010e Device Inspect
Time-Out of Lighting Selection Processing
-----
6.8 部品認識
102
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
48010f Device Inspect
Time-Out of Recognition ON Response
-----
480110 Device Inspect
Time Out of Image Capture
-----
480111 Device Inspect
Time Out of Image Capture Cancel
-----
480112 Device Inspect
Error Response of Image Capture Cancel
-----
480113 Device Inspect
Time Out of Recognition Result Response
-----
6.8 部品認識
103
SOM-2079
1005-001
6.9 自動段取り
Table 11
異常 ID 異常名、説明、要因および復帰方法
490601 Conveyor Width Automatic Adjustment
The PWC axis for conveyor width adjustment cannot be driven. The L1 axis might
be located lower than the pass line.
-----
490602 Conveyor Width Automatic Adjustment
The PWC axis for conveyor width adjustment cannot be driven. The L2 axis might
be located lower than the pass line.
-----
490603 Conveyor Width Automatic Adjustment
A PCB exists on the L conveyor.
-----
490604 Conveyor Width Automatic Adjustment
A PCB exists on the R conveyor.
-----
490605 Conveyor Width Automatic Adjustment
A PCB exists on the R conveyor.
-----
490606 Conveyor Width Automatic Adjustment
The PWC axis for conveyor width adjustment cannot be driven. The L axis might
be located lower than the pass line.
-----
490607 Conveyor Width Automatic Adjustment
An error occurred in the PWC axis while the conveyor width was being changed.
-----
490608 Conveyor Width Automatic Adjustment
An error occurred in the PWC axis while the conveyor width was being changed.
-----
490609 Conveyor Width Automatic Adjustment
The PWC axis is not zeroed completely.
-----
49060a Conveyor Width Automatic Adjustment
An error occurred in the PWC axis while the conveyor width was being changed
through an smooth inching operation.
-----
49060b Conveyor Width Automatic Adjustment
T
h
e current position of the L1 axis is not managed because the axis is not zeroed.
-----
49060c Conveyor Width Automatic Adjustment
Th
e current position of the L2 axis is not managed because the axis is not zeroed.
-----
6.9 自動段取り