SOM-2079-001_w.pdf - 第167页
164 SOM-2079 装置情報コード 表示区分 A( 装置情報の概要 ) 表示区分 B( 装置情報の詳細 ) 800D05 Maintenance Warning Keep the machine condition.(maintenance cycle time : Oil-Checkup/6-Monthlyy) 800D06 Maintenance Warning Keep the machine condition.(main…
163
SOM-2079
装置情報コード 表示区分 A( 装置情報の概要 )
表示区分 B( 装置情報の詳細 )
800806 Start Auto Recovery Mode
Comp. Thickness(sensor)
800807 Start Auto Recovery Mode
Comp. Thickness(sensor)
800808 Start Auto Recovery Mode
Comp. Pick-up Diff.(recog)
800809 Start Auto Recovery Mode
Comp. Reverse(recog)
80080b Start Auto Recovery Mode
Feeder Reload Stop (Splicing)
800901 Alarm for Shortage of Comp.
The tape end was detected. Please remove the cover tape from the storage
section.
800902 Alarm for Shortage of Comp.
Few components to feed.
800903 Alarm for Shortage of Comp.
A splicing tape was detected. (Alarm E3) Resupply the component. Please
remove the cover tape from the storage section.
800A01 Product Information
Finished product interval :
800A02 Product Information
Auto run interval :
800A03 Product Information
Nozzle usage interval :
800A04 Product Information
Product started by RUN MODE "PASS"Operation.
800A05 Product Information
Please confi
rm the PCB which is the one before installing Cmpnt. There is an
interference between High-speed Head and installed Cmpnt.
800A06 Product Information
Confirmation operation is executed by Multi-func Head for the interference
between Mounted Cmpnt and High-speed Head.
800B01 Machine Interface Signal
No signal from furnace.
800C01 Cancel Recovery on
-----
800D01 Maintenance Warning
Trash box fill up warning.(notice count over)
800D02 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/Weekly)
800D03 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/1-Monthly)
800D04 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/3-Monthly)
1005-001
6.19 装置情報
164
SOM-2079
装置情報コード 表示区分 A( 装置情報の概要 )
表示区分 B( 装置情報の詳細 )
800D05 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/6-Monthlyy)
800D06 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/Designate
#1)
800D07 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/Designate
#2)
800D08 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Upkeep-Checkup/Nozzle)
800D09 Maintenance Warning
Keep
t
he machine condition.(maintenance cycle time : Upkeep-Checkup/Filter #1)
800D0A Maintenance Warning
Keep t
he machine condition.(maintenance cycle time : Upkeep-Checkup/Filter #2)
800D0B Maintenance Warning
Keep the machine condition.(maintenance cycle time : Designate-Checkup/Item
#1)
800D0C Maintenance Warning
Keep the machine condition.(maintenance cycle time : Designate-Checkup/Item
#2)
800D0D Maintenance Warning
Keep the machine condition.(maintenance cycle time : Designate-Checkup/Item
#3)
800D0E Maintenance Warning
Component box fill up warning.(notice count over)
800D0F Maintenance Warning
It was the time of maintenance. [A flux unit] Please perform cleaning of a fl
ux
spin drum.
800E01 Program Change Warning
Check the set-up of machine.(program change completed)
800E02 Program Change Warning
Check the set-up of machine.(Program change completed. Run Mode changed to
"PASS".)
800F01 Program Change Warning
800F02 Program Change Warning
800F03 Program Change Warning
800F04 Program Change Warning
800F05 Program Change Warning
1005-001
6.19 装置情報
165
SOM-2079
装置情報コード 表示区分 A( 装置情報の概要 )
表示区分 B( 装置情報の詳細 )
800F06 Program Change Warning
800F07 Program Change Warning
800F81 Program Change Warning
800F82 Program Change Warning
800F83 Program Change Warning
800F84 Program Change Warning
801001 Auto Offset Teach Information
Tape pocket recog error(run continue)
801101 Nozzle diameter confi
rmation
The disagreement of the nozzle diameter was detected with the linear measure.
There is a possibility of the linear measure dirt and the nozzle dirt,please confirm
whether a different nozzle has adhered.
801201 Stat Auto Head Recovery
Cpu Communication error occurred.(CPU2-CPU3)
801202 Stat Auto Head Recovery
Head cam origin return action not complete.(Not CAM ORIGIN position)
801203 Stat Auto Head Recovery
Head Driver communication is time out.(from cpu3 job)
801204 Stat Auto Head Recovery
Nozzle change action not complete.(cam lock action NG)
801205 Stat Auto Head Recovery
Head cam position return action not complete.
801206 Stat Auto Head Recovery
Nozzle change action not complete.(cam free action NG)
801207 Stat Auto Head Recovery
Nozzle change action not complete.(Not CAM ORIGIN position)
801208 Stat Auto Head Recovery
Unselected Nozzle Drop.
801209 Stat Auto Head Recovery
Component output error(Pick-up error) is detected by nozzle level was position.
;Nozzle posture detection
80120a Stat Auto Head Recovery
The selected nozzle was not at position. ;Nozzle posture detection
80120b Stat Auto Head Recovery
Component
output error(Others) is detected by nozzle level was position. ;Nozzle
posture detection
801301 Pick-up Position Feedback
Feedback value out of range. Please check feeder.
1005-001
6.19 装置情報