SOM-2079-001_w.pdf - 第150页
147 SOM-2079 異常 ID 異常名、説明、要因および復帰方法 610602 Board height measurement adjustment Measurement ranges exceed board size. ----- 610603 Board height measurement adjustment There is the measurement point which exceed the board …
146
SOM-2079
6.15 テスト
Table 17
異常 ID 異常名、説明、要因および復帰方法
610101 Comp Recog Test
The nozzle type data doesn't exist.
-----
610102 Comp Recog Test
-----
610103 Comp Recog Test
-----
610104 Comp Recog Test
-----
610105 Comp Recog Test
-----
610106 Comp Recog Test
-----
610107 Comp Recog Test
-----
610108 Comp Recog Test
-----
610109 Comp Recog Test
-----
610201 XY Beam Test
-----
610301 PEC Recog Test
-----
610401 PEC Recog Test
-----
610501 PEC Recog Test
-----
610601 Board height measurement adjustment
There is an abnormality in board height measurement adjustment.
-----
1005-001
6.15 テスト
147
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
610602 Board height measurement adjustment
Measurement ranges exceed board size.
-----
610603 Board height measurement adjustment
There is the measurement point which exceed the board size.
-----
1005-001
6.15 テスト
148
SOM-2079
1005-001
6.16 リード浮
6.16 リード浮
Table 18
異常 ID 異常名、説明、要因および復帰方法
6b0101 V.Bend Detection System Error
Communication time-out.
Check the coupling network cable between the V-bend unit PC and the main
machine.
6b0102 V.Bend Detection System Error
Error command.
Shut down the machine and power it up again.
6b0103 V.Bend Detection System Error
Error received data.
Shut down the machine and power it up again.
6b1001 V.Bend Detection System Error
Syetem error. (1000)
Shut down the machine and power it up again.
6b1011 V.Bend Detection System Error
Memory error in unit.(1010)
Shut down the machine and power it up again.
6b1061 V.Bend Detection System Error
Laser error.(1060)
Shut down the machine and power it up again.
6b1071 V.Bend Detection System Error
Memory error insensor section. (1070)
Shut down the machine and power it up again.
6b1081 V.Bend Detection System Error
Sensor cable not connected. (1080)
Check the connection between the V-bend unit PC and the sensor head.
6b1091 V.Bend Detection System Error
Unsteady mortor rotaion in sensor. (1090)
Check the connection of the power cable for the sensor head.
6b1101 V.Bend Detection System Error
Laser OFF. (1100)
Shut down the machine and power it up again.
6b2001 V.Bend Detection Operation Error
-----
-----
6b2011 V.Bend Detection Operation Error
Wrong level adjustment. (2010)
Shut down the machine and power it up again.
6b2031 V.Bend Detection Operation Error
Wrong component no. (2030)
Shut down the machine and power it up again.