SOM-2079-001_w.pdf - 第141页
138 SOM-2079 異常 ID 異常名、説明、要因および復帰方法 600303 Head Rotate Theta Axis offset ----- 600401 Head Rotate center offset teach ----- 600402 Head Rotate center offset teach ----- 600501 Reference mark position teach ----- 600502 R…
137
SOM-2079
6.14 自動教示
Table 16
異常 ID 異常名、説明、要因および復帰方法
600101 PCB recog camera & beam offset teach.
-----
600102 PCB recog camera & beam offset teach.
-----
600103 PCB recog camera & beam offset teach.
-----
600104 PCB recog camera & beam offset teach.
-----
600105 PCB recog camera & beam offset teach.
-----
600106 PCB recog camera & beam offset teach.
-----
600107 PCB recog camera & beam offset teach.
-----
600108 PCB recog camera & beam offset teach.
-----
600109 PCB recog camera & beam offset teach.
-----
600201 Comp. Recog Camera offset teach.
The glass Jig can not able to be recognized.
-----
600202 Comp. Recog Camera offset teach.
It entered in a specifi
ed frequency or less and it did not enter a permissible value.
-----
600203 Comp. Recog Camera offset teach.
-----
600301 Head Rotate Theta Axis offset
-----
600302 Head Rotate Theta Axis offset
-----
1005-001
6.14 自動教示
138
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
600303 Head Rotate Theta Axis offset
-----
600401 Head Rotate center offset teach
-----
600402 Head Rotate center offset teach
-----
600501 Reference mark position teach
-----
600502 Reference mark position teach
-----
600503 Reference mark position teach
-----
600504 Reference mark position teach
-----
600601 Nozzle position offset teach
-----
600602 Nozzle position offset teach
-----
600701 Fly recog Offset teach
-----
600702 Fly recog Offset teach
-----
600703 Fly recog Offset teach
-----
600704 Fly recog Offset teach
-----
600801 Feeder offset(A) teach
Please push the Feeder Ready SW
-----
600802 Feeder offset(A) teach
Feeder recog Mark Error
Manual Alignment
1005-001
6.14 自動教示
139
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
600803 Feeder offset(A) teach
Feeder connection is set in test mode.
-----
600804 Feeder offset(A) teach
The data of the feeder was not able to be read.
-----
600805 Feeder offset(A) teach
Feeder recog Process time over
-----
600901 Feeder offset(B) teach
-----
601000 Master nozzle level offset teach
-----
601101 Nozzle level offset teach
The nozzle level instruction result exceeded the tolerance.
-----
601200 Y Axis offset teach
-----
601301 Nozzle stocker offset teaching
Stocker Mark #1 Recognition Error
Please select "Mnl Align Mark1" and adjust the manual.
601302 Nozzle stocker offset teaching
Stocker Mark #2 Recognition Error
Please select "Mnl Align Mark2" and adjust the manual.
601400 Msater nozzle level offset teach
-----
601501 Recog camera light teach
Recog Process error
-----
601601 Comp. Recog Camera magnifi
cation teach.
Recog Process error
-----
601701 V.Bend Detection teach
Communication time-out.
Please confirm connected cable of lead fi
lting unit PC and the main body.
(network cable)
601702 V.Bend Detection teach
Error command.
Please confirm connected cable of lead fi
lting unit PC and the main body.
(network cable)
1005-001
6.14 自動教示