SOM-2079-001_w.pdf - 第63页
60 SOM-2079 異常 ID 異常名、説明、要因および復帰方法 436104 Single Tray Error The pallet cramp release operation was not completed within the specified time in the single tray feeder unit. (OFF is not set for the forward limit sensor, or O…
59
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
43390a Shuttle Tray Feeder P&P error
PPL axis wave form setting error
-----
43390b Shuttle Tray Feeder P&P error
PPL axis operating error
-----
43390c Shuttle Tray Feeder P&P error
PPL axis operating error
-----
43390d Shuttle Tray Feeder P&P error
Pick-up error
-----
43390e Shuttle Tray Feeder P&P error
Pick-up component take back error
-----
43390f Shuttle Tray Feeder P&P error
Tray feeder error
-----
433910 Shuttle Tray Feeder P&P error
Nozzle lower limit error
-----
433911 Shuttle Tray Feeder P&P error
Receive saucer vacuum ON
Please saucer vacuum OFF by manual operation
434001 Tray Feeder Sequence Error
Tray feeder sequence timeout
-----
436001 Shuttle Tray Feeder Sequence Error
Shuttle tray feeder sequence timeout
-----
436101 Single Tray Error
The safety cover of the single tray feeder unit is open.
-----
436102 Single Tray Error
The pallet stays on the improper position to operate in the single tray feeder.
(1) Confirm that the pallet moved to the backmost position.
(2) Confirm if the front or the back sensor is dirty.
436103 Single Tray Error
The pallet cramp operation was not completed within the specifi
ed time in the
s
ingle tray feeder unit. (ON is not set for the forward limit sensor, or OFF is not set
for the backward limit sensor.)
-----
1005-001
6.4 トレイフィーダ
60
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
436104 Single Tray Error
The pallet cramp release operation was not completed within the specified time
in the single tray feeder unit. (OFF is not set for the forward limit sensor, or ON is
not set for the backward limit sensor.)
-----
436105 Single Tray Error
The feeder READY switch is in "OFF".
-----
436106 Single Tray Error
The single tray feeder is not set to the machine.
-----
436107 Single Tray Error
The machine status is not in the "STOP/PAUSE"
-----
436108 Single Tray Error
Head Interlock was detected. (High Speed Head: NL-axis Interlock, Multi-
Functional Head: Pass line detection.)
-----
436109 Single Tray Error
The pallet positioning was not completed on time. (The pallet t
ransfer forward limit
sensor could not detect it.)
-----
43610a Single Tray Error
The pallet positioning release was not completed on time. (The pallet transfer
backward limit sensor could not detect it.)
-----
43610b Single Tray Error
Component lifting was detected during pallet transfer forward.
Pr
ess the button for the tray resupply cover to evacuate the pallet. Open the cover
and check the component on the pallet.
43610c Single Tray Error
Component lifting was detected during pallet transfer backward.
Pr
ess the button for the tray resupply cover to evacuate the pallet. Open the cover
and check the component on the pallet.
43610d Single Tray Error
Single tray feeder; data reading time out (rear)
Turn off the Feeder Ready switch once then, switch on it again.
43610e Single Tray Error
Single tray feeder; data reading time out (front)
Turn off the Feeder Ready switch once then, switch on it again.
436201 Interlock error for the 1 pallet change tray feeder
An emergency stop was detected in the main body.
Turn on the machine main body and start the Auto operation.
1005-001
6.4 トレイフィーダ
61
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
436202 Interlock error for the 1 pallet change tray feeder
A safety cover open was detected on the main body.
Close the main body safety cover during Auto operation.
436203 Interlock error for the 1 pallet change tray feeder
The tray resupply cover is open. [S6207]
Close the tray resupply cover during Auto operation.
436204 Interlock error for the 1 pallet change tray feeder
The shutter closed was detected at the pallet discharge spout. [B6212]
-----
436205 Interlock error for the 1 pallet change tray feeder
A fl
ying pallet was detected at the pallet discharge spout. [B6217]
Check the physical relationship between the pallet fl
y-out detection sensor
(B6217) and the pallet.
436206 Interlock error for the 1 pallet change tray feeder
Pallet resupply interlock was detected.
-----
436207 Interlock error for the 1 pallet change tray feeder
A component was detected on the tray pallet. [B6218]
Open the tray resupply cover and remove the component on the tray pallet.
436208 Interlock error for the 1 pallet change tray feeder
A component was detected on the tray pallet. [B6219]
Open the tray resupply cover and remove the component on the tray pallet.
436209 Interlock error for the 1 pallet change tray feeder
A component was detected on the tray pallet. [B6220]
Open the tray resupply cover and remove the component on the tray pallet.
436301 Error in tray feeder magazine ready
The lower magazine is not still positioned.
Open the lower magazine cover and position the magazine.
436302 Error in tray feeder magazine ready
The upper magazine is not still positioned.
Open the upper magazine cover and position the magazine.
436401 Error in tray feeder magazine ready
The rack shutter on the lower magazine of the operator side is not closed.
Open the lower magazine cover and reset the pallet correctly.
436402 Error in tray feeder magazine ready
The rack shutter on the upper magazine of the operator side is not closed.
Open the upper magazine cover and reset the pallet correctly.
437001 Tray resupply operation error
Operation mode error (System)
-----
437002 Tray resupply operation error
Disagreement of the returning magazine type
Check to classify the magazine types in 10-step and 15-step.
1005-001
6.4 トレイフィーダ