SOM-2079-001_w.pdf - 第130页

127 SOM-2079 異常 ID 異常名、説明、要因および復帰方法 4b2426 Feeder (Movement Error) Alarm Code:E5 - Redundant Order Error ----- 4b2427 Feeder (Movement Error) Alarm Code:E6 - Timeout Error in Changing Servo Motor Axis ----- 4b2428 Feeder…

100%1 / 179
126
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
4b2403 Feeder (Movement Error)
Alarm Code:E2 - Origin Position Checking Error (Excessively out of the origin
during servo ON)
If the error occurs frequently, replace the feeder. (It may be caused by trouble of
the control P.C.B..)
4b2405 Feeder (Movement Error)
Alarm Code:E4 - Positioning Completion Timeout (Foreign substances in the
sprocket wheel)
Confi
rm whether or not the tape is being jammed on the path./ Confi
rm the reel to
operate smoothly./ Confirm whether or not some components and dust are being
caught in the sprocket.
4b2406 Feeder (Movement Error)
Alarm Code:E5 - Redundant Order Error
-----
4b2407 Feeder (Movement Error)
Alarm Code:E6 - Lane Change Timeout Error
If the error occurs frequently, replace the feeder. (It may be caused by trouble of
the control P.C.B..)
4b2408 Feeder (Movement Error)
Alarm Code:E7 - Servo ON Timeout
If the error occurs frequently, replace the feeder. (It may be caused by trouble of
the control P.C.B..)
4b2410 Feeder (Movement Error)
A pick-up error occurred due to feeder operation problem. Please check the
feeder and the component.
-----
4b2411 Feeder (Movement Error)
Alarm Code:E5 - Redundant Order Error (A feeding error may occur.)
Confi
rm whether or not the tape is being jammed on the path./ Confi
rm the reel to
operate smoothly./ Confirm whether or not some components and dust are being
caught in the sprocket./ Confirm whether or not some components and dust are
being caught in the
4b2421 Feeder (Movement Error)
Alarm Code: E0 - Deviated origin position of the belt transfer servo motor axis
Check whether or not the shield plate position attached to the belt transfer servo
motor axis deviated.
4b2422 Feeder (Movement Error)
Alarm Code:E1 - RS section Driving Error
Check whether or not dust adheres to the sensor position of the PS unit startup
trigger.
4b2425 Feeder (Movement Error)
Alarm Code:E4 - Positioning Completion Timeout
Check whether or not foreign particles get into the servo motor timing belt and
worm axis /worm wheel sections.
1005-001
6.11 その他
127
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
4b2426 Feeder (Movement Error)
Alarm Code:E5 - Redundant Order Error
-----
4b2427 Feeder (Movement Error)
Alarm Code:E6 - Timeout Error in Changing Servo Motor Axis
-----
4b2428 Feeder (Movement Error)
Alarm Code:E7 - Servo ON Timeout
-----
4b24a1 Feeder (Movement Error)
An error occurred before the feeder operation.
-----
4b24a2 Feeder (Movement Error)
An error occurred in the feeder operation.
-----
4b24a3 Feeder (Movement Error)
Feeder error (feeding time-out)
-----
4b2501 Failed Splicing Operation
Alarm Code:E3 - (1)No supplied history/ (2)Dirty splicing detection sensor (dust
adhesion)
(1) Please operate to resupply components in the machine after splicing
operation./ (2) Please clean the joint detection sensor.
4b2601 Unit PCB BBR Information
There is no information in the relevant PCB (on the Transfer Conveyor).
Delete the BBR information after removing the P.C.B..
4b2602 Unit PCB BBR Information
There is no information in the relevant PCB (on the Transfer XY-Table).
Delete the BBR information after removing the P.C.B..
4b2603 Unit PCB BBR Information
A problem was found in the unit PCB BBR information.
Delete the BBR information after removing the P.C.B..
4b2701 Start Process(Feeder Connect Error)
A special feeder is appointed. Please confi
rm the model of a set feeder.
-----
4b2702 Start Process(Feeder Connect Error)
A special feeder is set. Please confirm the model of a set feeder.
-----
4b2711 Start Process(Feeder Connect Error)
ACV Check Error. Component ID on the feeder is not same as one specified by
current program.
-----
4b2712 Start Process(Feeder Connect Error)
Set "enable" for destination alternate feeder.
-----
1005-001
6.11 その他
128
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
4b2713 Start Process(Feeder Connect Error)
There is a splicing failure feeder.
-----
4b2721 Start Process(Feeder Connect Error)
The reel list check is not completed.
-----
4b2722 Start Process(Feeder Connect Error)
Feeder is not ready
-----
4b2731 Start Process(Feeder Connect Error)
Please turn on the Feeder Ready SW (rear).
-----
4b2732 Start Process(Feeder Connect Error)
Please turn on the Feeder Ready SW (front).
-----
4b2733 Start Process(Feeder Connect Error)
Please set the feeder (rear) that used by the pattern program.
-----
4b2734 Start Process(Feeder Connect Error)
Please set the feeder (front) that used by the pattern program.
-----
4b2735 Start Process(Feeder Connect Error)
Feeder communication not fi
nish (rear)
Push the feeder ready sw(rear) OFF to ON
4b2736 Start Process(Feeder Connect Error)
Feeder communication not finish (front)
Push the feeder ready sw(front) OFF to ON
4b2801 2D BarCode Information
Socket Connection Error
-----
4b2802 2D BarCode Information
The communication of the barcode info. was not completed in prescribed time.
-----
4b2803 2D BarCode Information
An error response was received form the destination device of the barcode info.
-----
4b2804 2D BarCode Information
An error occurred in the sending process of the barcode info.
-----
4b2805 2D BarCode Information
Internal Processing Error
-----
1005-001
6.11 その他